UTP Cables

Product Details:

The 100 Base-T Telco Panel is designed for installations that require connectivity with hubs that offer 50 pin connector front end presentation (e.g. Cabletron and Cisco). The fully enclosed unit offers protection for the PCB connection and consists of 24 x RJ45 ports on the front with 2 x 50 pin female connectors at the back. Providing two pairs to each 8 pin RJ45 jack, pair one is terminated on pins 1 and 2 and pair two is terminated on pins 3 and 6. One 50 pin connector serves 12 ports and is wired to the IEEE.802.3 Ethernet 100 Base-TX and 100 Base-T2 standard.

Features:

• 1U standard 19 rack mount
• Category 5 performance
• 2 Pair wiring
• RJ21X Telco Connectors
• Quick and Easy rear connection

Product Details:

The ISDN (Integrated Systems Digital Network) Line Adapter Unit is used to convert a standard RJ45 socket to ISDN in a star wired system. The ISDN LAU has “ISDN” marked on the shell for identification.

Features:

• Rugged design
• Flying lead for flexibility

Product Details:

Line Adapter Units allow telecommunications equipment fitted with standard BT telephone plugs to be connected to RJ45 based structured cabling systems. The PBX Mastered Line Adapter Unit contains a capacitor across 4 & 5 of the BT telephone socket. Simple to install, the PBX Mastered Line Adapter Unit (LAU) is used for telephone extensions routed through the PABX system.

Features & Benefits:

• OFTEL GA5 approved
• Used for telephone extensions on PABX
• Rugged design

Product Details:

Line Adapter Units allow telecommunications equipment fitted with standard BT telephone plugs to be connected to RJ45 based structured cabling systems. The PBX Mastered Line Adapter Unit contains a capacitor across 4 & 5 of the BT telephone socket. Simple to install, the PBX Mastered Line Adapter Unit (LAU) is used for telephone extensions routed through the PABX system.

Features:

• OFTEL GA5 approved
• Used for telephone extensions on PABX
• Rugged design

Product Details:

The MOD-SNAP modular system provides a flexible and versatile method of installation, allowing the user the choice of installing as many data outlets as required. The ISDN module offers a versatile method of installing ISDN services in a structured cabling environment. Built-in resistors within the rear??mounted KATT RJLP connector provide the correct termination of the ISDN Basic Rate S-Bus.

Features

• Fitted with built-in resistors
• Blue shutter distinguishes ISDN from other modules
• No special application tooling requirements
• Fully compliant with ISO 8877

Product Details:

The Molex Voice Cabling system is expressly designed for voice circuits, such as block cabling and PBX inter connections. The Molex voice cabling system provides a complete range of products to facilitate a complete voice cabling system, including; termination modules, mounting frames, distribution boxes, tester interfaces and over-voltage protection.

The Voice Cabling system is compatible with other popular cabling systems enabling integration with legacy systems for expansion or refurbishment projects.

A number of different size back mount frames are available to accommodate the modules to suit a variety of application and environments. The frames accommodate modules, over-voltage protection and labelling equipment for a complete system.

Features:

• Available in 30, 50, 100, 270, 552/690 Pair Backmount and Clip on Configurations
• Stainless steel construction
• Modules mount directly onto frame
• Label holder available separately
• Dust covers available separately
• Suitable for wall or cabinet installations

Product Details:

The Gas Arrestor Tube (GAT) is designed for use with the unloaded Gas Arrestor Magazine.

Features:

• Designed for use with the unloaded Gas Arrestor Magazine.

Product Details:

The Molex PowerCat 6-500 is a premium Category 6 U/UTP cable that is ideal for supporting high speed Gigabit Ethernet networks. This cable is key componet of the Molex PowerCat 6 end-to-end solution.

Features & Benefits:

• Specified and tested to 550 MHz
• ETL verified to TIA-568-C.2 Category 6 standard
• Electrical performance characteristics, including balance, guaranteed across entire frequency range
• Cross filler provides improved electrical performance
• 1000 feet to 0 foot markers
• Robust box design minimizes tangles during installation
• RoHS compliant