Patch Code And Panel

Product Details:

Molex PowerCat 5e Shielded Patch Cords are key components of the PowerCat 5e shielded end-to-end solution. Molex PowerCat 5e Patch Cords are designed to support high speed networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 5e patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on Boots.

Features:

• 4 pair 26 AWG stranded copper wire
• Pre-terminated with RJ45 plugs
• Slim clear anti-snag slip on boots
• Suitable for EIA 568A or 568B wiring
• PVC sheath
• RoHS Compliant

Product Details:

LC Fiber Optic patch cords are used to connect LC fiber panels within the LC System. LC patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the LC patch panel. When used with the rest of the LC system, the patch cords will provide connectivity information to the LC system.

Features:

• Robust duplex housings protect fibers
• Monitoring contact interfaces with LC fiber patch panels
• LC patch cords are constructed from two fibers contained in an outer jacket
• Standard jacket material is Low Smoke Zero Halogen (LS0H)
• Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions

Product Details:

ST Fiber Optic patch cords are used to connect ST fiber panels within the ST System. ST patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the ST patch panel. When used with the rest of the ST system, the patch cords will provide connectivity information to the ST system.

Features:

• Robust duplex housings protect fibers
• Monitoring contact interfaces with ST fiber patch panels
• ST patch cords are constructed from two fibers contained in an outer jacket
• Standard jacket material is Low Smoke Zero Halogen (LS0H)
• Available in single mode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions.

Product Details:

MIIM G3 Category 6 UTP Patch Panels are used within the MIIM G3 System. Each 1U 24 Port Patch Panel can connect to the MIIM scanner with one control unit data on the rear of the panel which provides the data bus connection. The data bus connection port connects the panel to the MIIM scanner via a standard RJ45 patch cord. The patch panel is used by the MIIM G3 system to track connectivity in the patch zone area. LED status indicators on the panel show status of connectivity between the panel and the scanner and also provide panel guidance for work orders. The MIIM G3 Patch Panels consist of 24 Keystone jacks which is Category 6 compliant and meets the relevant cabling standards for category 6 performance. The jack is engineered for use across a broad range of Molex products.

Features & Benefits:

• Data bus connection to the MIIM Scanner is via an industry standard RJ45 patch cord
• Category 6 field configurable for 568 A/B
• Integral cable management shelf ensures bend radius compliance
• International hardware kit contains both ANSI and metric hardware
• Can be terminated using industry standard punch-down tools
• Individually removable patch panel ports.

Product Details:

MIIM™ Fiber Optic enclosures are used within the MIIM System. The adapter interface is 24 duplex LC adapters. Each 1U 24 Port enclosure has one data bus connection port located on the rear of the panel that connects the panel to a MIIM scanner via a standard RJ45 patch cord. Two in-built power status indicators on the panel ensure visibility of power from the scanner. When connected to a MIIM scanner, the panels detect connection activity on each duplex LC port. The patch panel works as a conventional patch panel when not connected to the MIIM system.

Features:

• Two power status indicators to ensure proper connection of power supply from the scanner 
• Uses RJ45 patch cords for data bus connection to the MIIM scanner n Panel options for Single Mode and Multimode (OM1, OM2, OM3)
• Slide out cable management shelf
• Recessed mounting provides adequate space for routing patch cords, even in free standing enclosures with the front door closed 
• ANSI and international metric hardware kit provided.

Product Details:

MIIM scanners work with the MIIM server application software and MIIM patch panels to co-ordinate work order management, provide LED patch guidance, and to sense and convey the status of connectivity at work area outlets to the MIIM server. Each 1U scanner can be connected to up to 48 patch panels providing monitoring of up to 576 separate physical channels in a single cross-connect zone or 1152 channels in an interconnect zone. An unlimited number of scanners can be administered by the MIIM server in a single site. Standard RJ45 patch cords are used as the communication bus connection between scanners and patch cords.

In the event that the MIIM application cannot communicate with a scanner, the scanner records transactions in a queue for later delivery to the MIIM software. Scanners recover from power outages without requiring reconfiguration. MIIM scanners consume little power, which can be critical in power-hungry environments such as Data Centers.

Features:

• Support up to 48 patch panels, 576 crossconnect or 1152 interconnect separate physical channels.
• Smart polling enables continuous updating of MIIM with minimal impact to the network.
• Simple scanner configuration.
• Auto discovery of active hardware/devices & automatic database population.
• Mission critical port disconnection alerts.
• Trace to device location.
• High density scanner enables rack space to be maximized.
• Low power consumption minimizes heat generation
• Web interface for administration.
• Automatic Rediscovery/Re-synchronization after outage or system failure.
• Transaction queues record events for later delivery if the scanner is disconnected from the MIIM application.
• Scanner can be tested and activated independently of software activation.
• Data bus connection between the scanner and patch panel is via an industry standard RJ45 patch cord.

Product Details:

The 24 Port (1U) and 48 Port (2U) PowerCat 6A Shielded Patch Panels are made from robust sheet metal. These panels are also supplied with robust removable rear cable management trays for cable strain relief and neat cable dressing. Port numbering is provided on the front and rear of the panel and individual ports may be colour coded using connector icon labels for site specific network administration. The PowerCat 6A Shielded Patch Panel features the unique DataGate™ Shielded connector. This shielded connector offers superior alien crosstalk suppression, excellent insertion loss, and provides enhanced electromagnetic interference (EMI) protection by utilising robust die-cast zinc alloy connector body housing. This shielded connector also features a unique spring loaded shutter that not only protects it from dust and contaminates, but the ingenious spring loaded design also ejects improperly seated patch cords. The shielded connector is dual colour coded for either 568A or 568B wiring schedules. The DataGate Power Cat 6A Shielded connector was specifically developed for high-speed data transmission; designed to exceed the highest electrical performance standards in the industry. The DataGate PowerCat 6A Shielded connector is also backwards compatible with Shielded C6 and C5e systems Molex recommends that the full range of PowerCat 6A Shielded products be used in a system to maximise cabling performance. This system is compliant with the latest ISO 11801 AMD 1 Class EA and TIA-568-C.2 Cat 6A for the support of 10G BASE-T.

Features and Advantages:

• Available in 24 Ports 1U and 48 Port 2U 
• Removable rear cable management included 
• Power Cat 6A Datagate Shielded connector included 
• Patented IDC V-shaped contacts that flex not fatigue when terminated 
• Category 6A performance when installed as a complete Power Cat 6A Shielded System
• RoHS Compliant

Product Details:

The T1 Patch Panel provides network connections for 1.544 Mbps digital services. Often referred to as a DS1 signal, T1 is a transmission repeater system used to carry digitised voice over four-wire twisted pair cabling. The front of the TI Patch Panel is channel numbered and includes snap on designation strips with paper inserts for custom channel identification. The back of the panel features patented KATT IDC contacts and an integral shelf with tie downs for strain relief of incoming cables.

Features:

• 1U 19" standard rack mount
• 24 Port
• Front panel is channel numbered
• Includes snap on designation for custom channel identification
• Features patented KATT IDC contacts on the back
• Integral cable management shelf

Product Details:

The Molex PowerCat Unloaded DataGate Patch Panels can be configured to provide the exact number of modular ports required. DataGate Category 5E UTP, Category 6 UTP, or Category 6A shielded jacks can be terminated to cable and then snapped into this DataGate patch panel. The patch panel and rear cable manager are constructed of cold-rolled steel for strength and durability.

Features:

• Available in 1U 24P Flat, 1U 24P Angle, 2U 48P Flat, 2U 48P Angle
• Easy snap in DataGate UTP or Shielded Jacks (sold separately)
• Modularity provides installation flexibility
• Front portable labelling
• Individually removable patch panel ports
• Removable cable management shelf ensures bend radius compliance
• ANSI and metric hardware kit included
• Ideal for use with industry standard 110 punch down tool.

Product Details:

PowerCat 6 Angled Patch Panels are ideal for installations of high density or which utilize extensive side and end-of-the-rack cable management. The angled feature provides enhanced port access and minimizes patch cord bend radius to the rack. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. Each RJ45 port features a patented spring-loaded shutter and can be color coded to match jack outlets with the use of optional port icons. Offering both front and rear labeling options, the patch panel is constructed of cold-rolled steel for additional strength and durability.

Features:

• Each port features the patented spring-loaded shutter:
  • prevents incomplete mating
  • protects from dust and contaminants
• Patented IDC V-shaped contacts that flex not fatigue when terminated
• Features pointed IDC towers to speed termination and enhance cable retention
• Dual color-coding allows for 568 A/B wiring configuration
• Front and rear port labeling (port sequence 1–480) as well as panel identification label
• 4 x 6 ganged jack configuration
• Individually removable patch panel ports
• Removable cable management shelf(s) ensure bend radius compliance
• Available with either ANSI and metric hardware kit
• Can be terminated using industry standard punch-down tools
• RJ45 port which is RJ-11 compatible
• molded category identification on each port face as well as optional port identification icons.

Product Details:

PowerCat 6 Patch Panels are the premier Molex patch panel product line. A key product used in both Category 6 link and channel gigabit ethernet applications. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. Each port features a patented spring-loaded shutter and can be color coded to match jack outlets. Offering both front and rear labeling options, the patch panel is constructed of cold-rolled steel for additional strength and durability.

Features & Benefits:

• 24 Ports 1U
• EIA 568A/B wired
• ETL verified
• Standard 19" rack mount
• IDC contacts that flex not fatigue when terminated
• Pointed IDC towers to speed termination and enhance cable retention
• Integral cable management shelf ensures bend radius compliance
• Individually removable patch panel ports.

Product Details:

The Molex PowerCat Unloaded DataGate Patch Panels can be configured to provide the exact number of modular ports required. DataGate Category 5E UTP, Category 6 UTP, or Category 6A shielded jacks can be terminated to cable and then snapped into this DataGate patch panel. The patch panel and rear cable manager are constructed of cold-rolled steel for strength and durability.

Features:

• Available in 1U 24P Flat, 1U 24P Angle, 2U 48P Flat, 2U 48P Angle
• Easy snap in DataGate UTP or Shielded Jacks (sold separately)
• Modularity provides installation flexibility
• Front portable labelling
• Individually removable patch panel ports
• Removable cable management shelf ensures bend radius compliance
• ANSI and metric hardware kit included
• Ideal for use with industry standard 110 punch down tool.

Product Details:

The Molex 50 port Voice Patch Panel is dedicated to the termination of vertical cabling, supporting UTP, 4, 25 or 50 pair cables in a voice backbone. The 10 port unshielded harmonicas allow for patching of up to 50 ports in only 1U, using standard UTP RJ45 patch cords. Finished in graphite grey, this rugged panel is easy to terminate and is a space & cost effective solution for analogue or digital telephone services, supporting pairs 1, 2, 4, 5 and 3, 6.

Features:

• 1U standard 19” rack mount
• Category 3 performance
• 50 x RJ45 KATT IDC
• Pairs 1/2, 3/6, 4/5
• Labeling system
• Technical Information

Product Details:

Optimised Performance- low loss MTP Elite, discreet Premium connectors and OM4 fibre assures low insertion losses and power penalties in tight power budget high speed network environment High Density- multifiber connector and compact dimension of ruggedized Micro cable ease space in costly data center environment.

Product Details:

PowerCat 6 Patch Panels are the premier Molex patch panel product line. A key product used in both Category 6 link and channel gigabit ethernet applications. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. Each port features a patented spring-loaded shutter and can be color coded to match jack outlets. Offering both front and rear labeling options, the patch panel is constructed of cold-rolled steel for additional strength and durability.

Features:

• EIA 568A/B wired
• ETL verified
• Standard 19" rack mount
• IDC contacts that flex not fatigue when terminated
• Pointed IDC towers to speed termination and enhance cable retention
• Integral cable management shelf ensures bend radius compliance
• Individually removable patch panel ports

IDC Connector

• Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
• Contact Material: Copper Alloy IDC

Product Details:

Molex PowerCat 6 Shielded Patch Cords are key components of the PowerCat 6 shielded end-to-end solution. Molex PowerCat 6 Patch Cords are designed to support high speed networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6 patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots.

Features:

• 4 pair 26 AWG stranded copper wire
• Pre-terminated with RJ45 plugs
• Slim clear anti-snag slip on boots
• Suitable for EIA 568A or 568B wiring
• PVC sheath
• RoHS Compliant

Product Details:

Molex PowerCat 6 Shielded Patch Cords are key components of the PowerCat 6 shielded end-to-end solution. Molex PowerCat 6 Patch Cords are designed to support high speed networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6 patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots.

Features:

• 4 pair 26 AWG stranded copper wire
• Pre-terminated with RJ45 plugs
• Slim clear anti-snag slip on boots
• Suitable for EIA 568A or 568B wiring
• PVC sheath
• RoHS Compliant

Product Details:

Molex PowerCat 6 Shielded Patch Cords are key components of the PowerCat 6 shielded end-to-end solution. Molex PowerCat 6 Patch Cords are designed to support high speed networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6 patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots.

Features:

• 4 pair 26 AWG stranded copper wire
• Pre-terminated with RJ45 plugs
• Slim clear anti-snag slip on boots
• Suitable for EIA 568A or 568B wiring
• PVC sheath
• RoHS Compliant

Product Details:

Molex PowerCat 6 Shielded Patch Cords are key components of the PowerCat 6 shielded end-to-end solution. Molex PowerCat 6 Patch Cords are designed to support high speed networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6 patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots.

Features:

• 4 pair 26 AWG stranded copper wire
• Pre-terminated with RJ45 plugs
• Slim clear anti-snag slip on boots
• Suitable for EIA 568A or 568B wiring
• PVC sheath
• RoHS Compliant

Product Details:

ST Fiber Optic patch cords are used to connect ST fiber panels within the MIIM System. St patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the ST patch panel. When used with the rest of the ST system, the patch cords will provide connectivity information to the ST system.

Features:

• Robust duplex housings protect fibers
• Monitoring contact interfaces with ST fiber patch panels
• ST patch cords are constructed from two fibers contained in an outer jacket
• Standard jacket material is Low Smoke Zero Halogen (LS0H)
• Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions

Product Details:

Molex’s advanced manufacturing process provides exceptional performance in patch cord assemblies. Molex maintains strict control over the ferrule endface surface. With the aid of an interferometer, the ferrule endface geometry is measured for radius, concentricity and apex offset, ensuring high performance and long-term reliability of all terminations.

Features & Benefits:

• OM2 Multimode performance
• Standard or custom assemblies
• Precision ferrule endface geometry
• Controlled Fiber protrusion
• Factory polished, tested and serialized

Product Details:

Product Facts:

• Pre-connectorized multi-fiber cable is becoming more popular for fiber installation project 
• It is definitely an efficient and economical solution rather than on site termination or splicing 
• Designed for administrative convenience-guaranteed transmit-to-receive connectivity 
• With pulling eye assembly feature,it's available for fast and safe installation 
• Just simply lay the cable and do patching 

Product Details:

Nowadays, fiber has moved closer to the end-user. The solution for passing the fiber to the end-user is called FTTH, which means Fiber To The Home. FTTH is easily affordable technology with many advantage, such as more bandwidth, reliability and low cost in order to meet the next generation customers' demand. FTTH can provide the customers with information such as DATA, VOICE, VIDEO (TRIPLE PLAY) using only one fiber. According to this situation, to better compatible with FTTH drop cable, JLD has successfully developed a new type of connector-SC FTTH Connector, with PC, APC polishing, which has been well used in the FTTH project.

Product Details:

We ensures the product’s strength, performance and longer service lie. In addition, the offered range is priced at the most reasonable rate possible.

 

Product Details:

We ensures the product’s strength, performance and longer service lie. In addition, the offered range is priced at the most reasonable rate possible.

 

Product Details:

Molex’s advanced manufacturing process provides exceptional performance in patch cord assemblies. Molex maintains strict control over the ferrule endface surface. With the aid of an interferometer, the ferrule endface geometry is measured for radius, concentricity and apex offset, ensuring high performance and long-term reliability of all terminations.

Features & Benefits:

• OM3 Multimode performance
• Standard or custom assemblies
• Precision ferrule endface geometry
• Controlled Fiber protrusion
• Factory polished, tested and serialized

Product Details:

Molex’s advanced manufacturing process provides exceptional performance in patch cord assemblies. Molex maintains strict control over the ferrule endface surface. With the aid of an interferometer, the ferrule endface geometry is measured for radius, concentricity and apex offset, ensuring high performance and long-term reliability of all terminations.

Features & Benefits:

• OM1 Multimode performance
• Standard or custom assemblies
• Precision ferrule endface geometry
• Controlled fiber protrusion
• Factory polished, tested and serialized

Product Details:

The Shielded 1U 24 Port Unloaded Keystone Patch Panel is shipped unloaded and can be configured to provide the exact number of modular ports. The Patch Panel is made of steel sheet and can accept 24 shielded and unshielded Keystone modules. The Cable management bar is also made of steel and equipped with an earth screw. The front of the panel is equipped with a transparent holder for port labelling. Keystone jacks (sold separately) can be terminated to the cable and then snapped into the patch panel.

Features:

• Available in 1U 24 Port straight version
• Easy snap in UTP and FTP Keystone Jacks (sold separately)
• Modularity provides installation flexibility
• Front port labeling
• Individually removable patch panel ports
• Removable cable management shelf ensures bend radius compliance
• Global hardware kit included
• RoHS compliance

Each panel is supplied with:

• 19” 1U 24 Port Unloaded Shielded Keystone Patch Panel with Cable Management Bar
• Front port identification
• Global hardware kit
• Cable ties

Product Details:

The MIIM Outlet Terminator is used at the work area outlet to allow the MIIM system to monitor the connection of the horizontal cable to the work area outlet. The MIIM Outlet Terminator is effectively a stuffer cap with in-built components that work exclusively in the Molex MIIM solution. It enables the MIIM system to determine circuit integrity to the work area outlet.

Communications between the MIIM Outlet Terminator and the MIIM Scanner are transparent to the data channel and operate outside the Ethernet bandwidth. The MIIM system can function independently of the MIIM outlet terminator. However, the terminator provides enhanced functionality in terms of monitoring spare or unused channels.

Features:

• Confirms circuit integrity between the MIIM patch panel and the work area outlet 
• Enables monitoring of changes and detects the presence of devices at the outlet 
• Transparent to the Data Channel
• RoHS Compliant

Product Details:

Molex Power Cat 6 Shielded Patch Cords are key components of the PowerCat 6 shielded end-to-end solution. Molex PowerCat 6 Patch Cords are designed to support high speed networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6 patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots.

Features:

• 4 pair 26 AWG stranded copper wire
• Pre-terminated with RJ45 plugs
• Slim clear anti-snag slip on boots
• Suitable for EIA 568A or 568B wiring
• PVC sheath
• RoHS Compliant

Product Details:

Molex PowerCat 6A Shielded Patch Cords were specifically designed to support high speed data networks for 10-Gigabit Ethernet (10GBASE-T) applications. The patch cord is made from high quality shielded four pair 26AWG stranded wire. Available in a range of colours and lengths, PowerCat 6A Shielded patch cords are pre-terminated with RJ45 shielded plugs and feature over-moulded anti-snag strain relief boots.

Features:

• Shielded 4 pair 26AWG stranded cable 
• Pre-terminated with WE8W shielded plugs
• ETL Verified
• Over-moulded anti-snag strain relief boots
• Suitable for EIA 568A/B wiring applications
• PVC jacket