BKP4 Technologies
BKP4 Technologies
Bansdroni, Kolkata, West Bengal
SEND SMS
SEND EMAIL

Molex Passive UTP Cables

We are a leading Wholesale Distributor of pair category 3 utp cable, datagate jack, router patch panel, port voice patch panel, pmt-00003 24 port 100 base and 24 port 100 base from Kolkata, India.

Pair Category 3 UTP Cable

Pair Category 3 UTP Cable
  • Pair Category 3 UTP Cable
Ask For Price
Product Price :Get Latest Price

Product Details:

Material24 AWG Solid Bare Copper
Diameter0.513mm
Patch Panel TypeCat 7, Fiber Patch Panel, Cat 5e, Cat 6a, Cat 6
ColorOrange
Cable lengthCustomized
BrandBKP4

Molex 25 pair Category 3 cable has been designed to support Telephony Voice Wiring applications. The cable has been design and tested in accordance with UL Subject 444, EIA/TIA568 & ISO/IEC 11801 standards.

Features:
  • Category 3 performance
  • Supports telephony voice wiring applications
  • PVC Sheath
  • color coded pairs for ease of termination


Insulation

  • Primary Insulation : PE
  • Average Thickness (±0.03mm): 0.20
  • Min Point Thickness (mm): 0.17
  • Insulation Dia (±0.03mm): 0.91
  • Twisting Lay Length (mm): 30 underneath
  • Cabling Lay Length (±20mm): 210


Jacket

  • Material: PVC
  • Average Thickness (±0.05mm): 0.75
  • Min Point Thickness (mm): 0.6mm
  • Outer Dia (±1.0mm): 11.5
  • Rip Cord: per request
  • color: Grey


Weight (kg/km): 174

 

Return Loss (db)

  • @ 0.772MHz: 12
  • @ 1MHz: 12
  • @ 4MHz: 12
  • @ 8MHz: 12
  • @ 10MHz: 12
  • @ 16MHz: 10


Attenuation (db/100m)

  • @ 0.772MHz: 2.2
  • @ 1MHz: 2.6
  • @ 4MHz: 5.6
  • @ 8MHz: 8.5
  • @ 10MHz: 9.7
  • @ 16MHz: 13.1


NEXT (dB)

  • @ 0.772MHz: 43.0
  • @ 1MHz: 41.3
  • @ 4MHz: 32.3
  • @ 8MHz: 27.8
  • @ 10MHz: 26.3
  • @ 16MHz: 23.3


DELAY

  • @ 0.772MHz
  • @ 1MHz: 570
  • @ 4MHz: 552
  • @ 8MHz: 547
  • @ 10MHz: 545
  • @ 16MHz 543
Request
Callback


Additional Information:

  • Item Code: 39-12525
Yes! I am interested

DataGate Jack

DataGate Jack
  • DataGate Jack
Ask For Price
Product Price :Get Latest Price

Product Details:

Contact Force100g minimum
Contact MaterialCopper Alloy
Plug Retention Force11 lbf minimum
Plastic HousingThermoplastic UL94V-0 rated or equivalent
Operating LifeMinimum 750 insertion cycles
BrandBKP4
ColorOff White

The DataGate jack is designed to maintain clean secure connections. The RJ-45 jack features a patented ‘spring-loaded shutter’ which protects it from dust and contaminants as well as provides tactile feedback – the spring-loaded shutter pops out an improperly seated patch cord – all with single-handed plug-in and removal. DataGate jacks utilize patented IDC V-shaped contacts that flex not fatigue when terminated.

Features:

  • Category 3 performance
  • 8 wire USOC configuration
  • Patented Spring-Loaded Shutter:
    • prevents incomplete mating
    • protects from dust and contaminants
  • Patented IDC V-shaped contacts that flex not fatigue when terminated
  • Features pointed IDC towers to speed termination and enhance cable retention
  • Dual color-coding allows for 568 A/B wiring configuration
  • Can be terminated using industry standard punch-down tools
  • RJ-11 compatible


IDC Connector

  • Plastic Housing: Thermoplastic UL94V-0 rated or equivalent
  • Operating Life: Minimum 20 reterminations
  • Contact Material: Copper Alloy
  • IDC Contact Plating: Tin/Lead Plate
  • Wire Accommodation: 22-24 AWG solid

Dimensions:

  • 23.9mm x 17.8mm x 32.3mm (.94"H x .70"W x 1.27"D)

  • Shipping Weight: 14g (.5 oz.)

Electrical Characteristics

  • Interface Resistance: 20 milliohms
  • Initial Contact Resistance: 2.5 milliohms
  • Insulation Resistance: >100 Megaohms
Request
Callback


Additional Information:

  • Item Code: KSJ-00029-01
Yes! I am interested

Router Patch Panel

Router Patch Panel
  • Router Patch Panel
Ask For Price
Product Price :Get Latest Price

Product Details:

Panel MateriaCold Rolled Steel Finish
Shipping Weight1.5kg
Panel MaterialCold Rolled Steel
BrandBKP4
ColorBlack
Dimensions44mm *483mm * 239mm (1.75inchH x 19inch W x 9.4inchD)

The Router Patch Panel is ideal for the break out of 68-pin SCSI (Cisco NM-16A and NM 32A) compatible routers into RJ45 ports. Using the Molex Router Patch Panel makes connecting compatible routers more efficient by removing the need to terminate octal cables individually. Configured as a 1U mountable patch panel, the back panel has four SCSI connectors which are converted, via an internal printed circuit board, into the front panel as thirty-two, clearly identified RJ45 ports.

Features:
  • 1U standard 19” rack mounted
  • Converts four SCSI connectors into thirty-two RJ45 ports
  • Category 3 performance
  • UL and CUL listed
  • 6mm Grounding Lug
  • Graphite grey textured finish


Request
Callback


Additional Information:

  • Item Code: PID-00089
Yes! I am interested

Port Voice Patch Panel

Port Voice Patch Panel
  • Port Voice Patch Panel
Ask For Price
Product Price :Get Latest Price

Product Details:

Thickness1.52mm
Shipping Weight1.275kgs
Wire Size2x 26-22 AWG
BrandBKP4
ColorBlack
Dimensions483 x 44 x 110mm

The Molex 50 port Voice Patch Panel is dedicated to the termination of vertical cabling, supporting UTP, 4, 25 or 50 pair cables in a voice backbone. The 10 port unshielded harmonicas allow for patching of up to 50 ports in only 1U, using standard UTP RJ45 patch cords. Finished in graphite grey, this rugged panel is easy to terminate and is a space & cost effective solution for voice installations. Features 1U standard 19 rack mount Category 3 performance 50 x RJ45 KATT IDC Pairs 3/6, 4/5 labeling system Technical Information'' Speciifcations Panel Material CRS (cold rolled steel) Thickness 1.52mm Coating Graphite Grey Powdercoat Jack Connector Contact Material Phosphor Bronze Contact Plating Sn/Pb Plastic Housing UL 94 V0 rated thermoplastic IDC Connector Operating Life Minimum 200 reterminations Contact Material Copper based alloy Contact Plating Sn/Pb over Ni Wire Size 2x 26-22 AWG solid or stranded Termination Tools Molex and other industry standard tools. Suitable for 0.4mm 0.6mm solid or stranded cable, minimum o.d. 1.5mm. Dimensions 483 x 44 x 110mm Shipping Weight 1.275kgs
Request
Callback


Additional Information:

  • Item Code: PID-0014550
Yes! I am interested

PMT-00003 24 Port 100 Base

PMT-00003 24 Port 100 Base
  • PMT-00003 24 Port 100 Base
Ask For Price
Product Price :Get Latest Price

Product Details:

Contact Plating1.25 micrometre Au/Ni
Operating LifeMinimum 1000 insertion cycles
Contact MaterialCopper based alloy
Area Network TypeLAN Capable
ConditionNew
LED IndicatorRequired
MaterialUL Listed Connector
BrandBKP4

The 100 Base-T Telco Panel is designed for installations that require connectivity with hubs that offer 50 pin connector front end presentation (e.g. Cabletron and Cisco). The fully enclosed unit offers protection for the PCB connection and consists of 24 x RJ45 ports on the front with 2 x 50 pin female connectors at the back. Providing two pairs to each 8 pin RJ45 jack, pair one is terminated on pins 1 and 2 and pair two is terminated on pins 3 and 6. One 50 pin connector serves 12 ports and is wired to the IEEE.802.3 Ethernet 100 Base-TX and 100 Base-T2 standard.

Features:
  • 1U standard 19" rack mount
  • Category 5 performance
  • 2 Pair wiring
  • RJ21X Telco Connectors
  • Quick and Easy rear connection


Jack Connector

  • Operating Life : Minimum 1000 insertion cycles
  • Contact Material : Copper based alloy
  • Contact Plating : 1.25 micrometre Au/Ni
  • Material : UL Listed Connector

Shipping Weight: 1.7kg

D.C. Resistance: <20mΩ

D.C. Resistance Imbalance: <2.0mΩ

Insulation Resistance: >100mΩ

Attenuation(db)

  • @ 1MHz: -0.09
  • @ 16MHz: -0.14
  • @ 100MHz: -0.35

Crosstalk (dB)

  • @ 1MHz: -85.2
  • @ 16MHz: -60.5
  • @ 100MHz: -41.2

Return Loss

  • @ 1MHz: >-23
  • @ 16MHz: >-23
  • @ 100MHz: >-23
Request
Callback
Yes! I am interested

24 Port 100 Base

24 Port 100 Base
  • 24 Port 100 Base
Ask For Price
Product Price :Get Latest Price

Product Details:

MaterialCRS (cold rolled steel)
Thickness1.52mm
CoatingGraphite Grey Powdercoat
Area Network TypeLAN Capable
ColorGrey
Redundant Power OptionYes
BrandBKP4

The 100 Base-T Telco Panel is designed for installations that require connectivity with hubs that offer 50 pin connector front end presentation (e.g. Cabletron and Cisco). The fully enclosed unit offers protection for the PCB connection and consists of 24 x RJ45 ports on the front with 2 x 50 pin female connectors at the back. Providing two pairs to each 8 pin RJ45 jack, pair one is terminated on pins 1 and 2 and pair two is terminated on pins 3 and 6. One 50 pin connector serves 12 ports and is wired to the IEEE.802.3 Ethernet 100 Base-TX and 100 Base-T2 standard.

Features:

  • 1U standard 19" rack mount
  • Category 5 performance
  • 2 Pair wiring
  • RJ21X Telco Connectors
  • Quick and Easy rear connection


Jack Connector

  • Operating Life : Minimum 1000 insertion cycles
  • Contact Material : Copper based alloy
  • Contact Plating : 1.25 micrometre Au/Ni
  • Material : UL Listed Connector

Shipping Weight: 1.7kg

D.C. Resistance: <20mΩ

D.C. Resistance Imbalance: <2.0mΩ

Insulation Resistance: >100mΩ

Attenuation(db)

  • @ 1MHz: -0.09
  • @ 16MHz: -0.14
  • @ 100MHz: -0.35

Crosstalk (dB)

  • @ 1MHz: -85.2
  • @ 16MHz: -60.5
  • @ 100MHz: -41.2

Return Loss

  • @ 1MHz: >-23
  • @ 16MHz: >-23
  • @ 100MHz: >-23
Request
Callback


Additional Information:

  • Item Code: PMT-00004
Yes! I am interested

Euromod ISDN Module

Euromod ISDN Module
  • Euromod ISDN Module
Ask For Price
Product Price :Get Latest Price

Product Details:

Contact Plating1.25 micrometres Au/Ni
Operating LifeMinimum 500 insertion cycles
Contact MaterialPhosphor Bronze
BrandBKP4
MaterialUL 94VO Thermoplastic
Usage/ApplicationCustomized

The Euromod modular system provides a flexible and versatile method of installation. This modular system offers a wide range of wallplates and modules that allow the user to install as many data outlets as required.

The ISDN module offers a versatile method of installing ISDN services in a structured cabling environment. Built-in resistors within the rear mounted KATT RJLP connector provide the correct termination of the ISDN Basic Rate S-Bus.

Features:

  • Fitted with built-in resistors
  • Blue shutter distinguishes ISDN from other modules
  • No special application tooling requirements
  • Fully compliant with ISO 8877

Specifications:

Jack Connector

  • Operating Life: Minimum 500 insertion cycles
  • Contact Material: Phosphor Bronze
  • Contact Plating: 1.25 micrometres Au/Ni
  • Material: UL 94VO Thermoplastic


IDC Connector

  • Operating Life: Minimum 100 Reterminations
  • Contact Material: Phosphor Bronze
  • Contact Plating: Sn/Pb over Ni
  • Wire Accommodation: 2 x 22-26 AWG solid or stranded

D.C. Resistance: <20mΩ

D.C. Resistance Imbalance: <2.0mΩ

Insulation Resistance: >100MΩ

Request
Callback


Additional Information:

  • Item Code: 17-10-017-A0012
Yes! I am interested

24 Port T1 Patch Panel

24 Port T1 Patch Panel
  • 24 Port T1 Patch Panel
Ask For Price
Product Price :Get Latest Price

Product Details:

Shipping Weight784g (1 lb. 12 oz.)
Contact MaterialPhosphor Bronze
BrandBKP4
MaterialGraphite Grey Powdercoated Steel
ColorBlack
Dimensions44mm x 483mm x 102mm (1.75inchH x 19inchW x 4inchD)

The T1 Patch Panel provides network connections for 1.544 Mbps digital services. Often referred to as a DS1 signal, T1 is a transmission repeater system used to carry digitised voice over four-wire twisted pair cabling. The front of the TI Patch Panel is channel numbered and includes snap on designation strips with paper inserts for custom channel identification. The back of the panel features patented KATT IDC contacts and an integral shelf with tie downs for strain relief of incoming cables.
Features:

  • 1U 19" standard rack mount
  • 24 Port
  • Front panel is channel numbered
  • Includes snap on designation for custom channel identification
  • Features patented KATT IDC contacts on the back
  • Integral cable management shelf


RJ48X Jack

  • Material: Thermoplastic UL94V-0
  • Contacts: Phosphor bronze with a minimum of 50 micro inches of gold plate over 100 micro inches of nickel
  • Wire: 24 AWG solid copper conductor

KATT IDC Connector

  • Plastic Housing: Thermoplastic UL94V-0
  • Contact Material: Phosphor Bronze
  • IDC Contact Plating: Solder Plate (60% tin / 40% lead)
Request
Callback


Additional Information:

  • Item Code: 27-1F-241-B004G
Yes! I am interested

MOD-SNAP ISDN Module

MOD-SNAP ISDN Module
  • MOD-SNAP ISDN Module
Ask For Price
Product Price :Get Latest Price

Product Details:

Operating Life Minimum500 insertion cycles
ColorWhite
Wire Accommodation2 x 22-26 AWG solid or stranded
BrandBKP4
MaterialSilicon
Usage/ApplicationCustomized

The MOD-SNAP modular system provides a flexible and versatile method of installation, allowing the user the choice of installing as many data outlets as required.

The ISDN module offers a versatile method of installing ISDN services in a structured cabling environment. Built-in resistors within the rear¿¿mounted KATT RJLP connector provide the correct termination of the ISDN Basic Rate S-Bus.

Features

  • Fitted with built-in resistors
  • Blue shutter distinguishes ISDN from other modules
  • No special application tooling requirements
  • Fully compliant with ISO 8877

Specifications


Jack Connector

  • Operating Life Minimum 500 insertion cycles
  • Contact Material Phosphor Bronze
  • Contact Plating 1.25 micrometres Au/Ni
  • Material UL 94VO Thermoplastic


IDC Connector

  • Operating Life Minimum 100 Reterminations
  • Contact Material Phosphor Bronze
  • Contact Plating Sn/Pb over Ni
  • Wire Accommodation 2 x 22-26 AWG solid or stranded

¿¿

D.C. Resistance <20m¿¿

D.C. Resistance Imbalance <2.0m¿¿

Insulation Resistance >100M¿¿

Request
Callback


Additional Information:

  • Item Code: 42-10-017-A0012
Yes! I am interested

150mm Line Adapter Unit

150mm Line Adapter Unit
  • 150mm Line Adapter Unit
Ask For Price
Product Price :Get Latest Price

Product Details:

ModelRJ45 Socket
Contact MaterialPhosphor bronze
Contact Plating1.25 micrometres Au/Ni
Operating LifeMinimum 500 insertion cycles
BrandBKP4
ColorGrey

The ISDN (Integrated Systems Digital Network) Line Adapter Unit is used to convert a standard RJ45 socket to ISDN in a star wired system. The ISDN LAU has “ISDN” marked on the shell for identification.

Features:

  • Rugged design
  • Flying lead for flexibility

RJ45 Socket

  • Operating Life: Minimum 500 insertion cycles
  • Contact Material: Phosphor bronze
  • Contact Plating: 1.25 micrometres Au/Ni
Request
Callback


Additional Information:

  • Item Code: 42-A0020
Yes! I am interested

150mm Line Adapter Unit

150mm Line Adapter Unit
  • 150mm Line Adapter Unit
Ask For Price
Product Price :Get Latest Price

Product Details:

Contact Plating50 micro-inch gold
ModelRJ45 Plug
MaterialPolycarbonate UL94 V-2
Contact MaterialPhosphor Bronze
Operating LifeMinimum 750 insertion cycles
BrandBKP4
ColorGrey

Line Adapter Units allow telecommunictions equipment fitted with standard BT telephone plugs to be connected to RJ45 based structured cabling systems. The PSTN Line Adapter unit contains a resistor, capacitor and gas discharge tube for over-voltage protection. Simple to install, the PSTN Fully Mastered Line Adapter Unit (LAU) is used on a direct line (not routed through the PABX system).

Features:
  • OFTEL GA5 approved
  • Converts a direct line to RJ45 cabling system
  • Rugged design


BT Socket

  • Operating Life: Minimum 1000 insertion cycles
  • Socket type: BT600 series
  • Contact Material: Gold over nickel plated Phosphor Bronze
Request
Callback


Additional Information:

  • Item Code: 42-111-1A
Yes! I am interested

150mm Line Adapter Unit

150mm Line Adapter Unit
  • 150mm Line Adapter Unit
Ask For Price
Product Price :Get Latest Price

Product Details:

Operating LifeMinimum 750 insertion cycles
MaterialPolycarbonate UL94 V-2
Contact MaterialPhosphor Bronze
Contact Plating50 micro-inch gold
ModelRJ45 Plug
BrandBKP4
ColorGrey

Line Adapter Units allow telecommunications equipment fitted with standard BT telephone plugs to be connected to RJ45 based structured cabling systems. The PBX Mastered Line Adapter Unit contains a capacitor across 4 & 5 of the BT telephone socket. Simple to install, the PBX Mastered Line Adapter Unit (LAU) is used for telephone extensions routed through the PABX system.


Features:


  • OFTEL GA5 approved
  • Used for telephone extensions on PABX
  • Rugged design

BT Socket

  • Operating Life: Minimum 1000 insertion cycles
  • Socket type: BT600 series
  • Contact Material: Gold over nickel plated Phosphor Bronze
Request
Callback


Additional Information:

  • Item Code: 42-111-2A
Yes! I am interested

3m Line Adapter Unit

3m Line Adapter Unit
  • 3m Line Adapter Unit
Ask For Price
Product Price :Get Latest Price

Product Details:

MaterialPolycarbonate UL94 V-2
Operating LifeMinimum 750 insertion cycles
Contact Plating50 micro-inch gold
ModelRJ45 Plug
BrandBKP4
ColorGrey

Line Adapter Units allow telecommunictions equipment fitted with standard BT telephone plugs to be connected to RJ45 based structured cabling systems. The PSTN Line Adapter unit contains a resistor, capacitor and gas discharge tube for over-voltage protection. Simple to install, the PSTN Fully Mastered Line Adapter Unit (LAU) is used on a direct line (not routed through the PABX system).

Features:

  • OFTEL GA5 approved
  • Converts a direct line to RJ45 cabling system
  • Rugged design

Specifications:


RJ45 Plug

  • Operating Life: Minimum 750 insertion cycles
  • Contact Material: Phosphor Bronze
  • Contact Plating: 50 micro-inch gold
  • Material: Polycarbonate UL94 V-2

BT Socket

  • Operating Life: Minimum 1000 insertion cycles
  • Socket type: BT600 series
  • Contact Material: Gold over nickel plated Phosphor Bronze
Request
Callback


Additional Information:

  • Item Code: 42-112-1A
Yes! I am interested

3m Line Adapter Unit

3m Line Adapter Unit
  • 3m Line Adapter Unit
Ask For Price
Product Price :Get Latest Price

Product Details:

Pack TypeBOX
Contact MaterialGold over nickel plated Phosphor Bronze
ModelRJ45 Plug
BrandBKP4
ColorGrey
Model Name/NumberCustomized

Line Adapter Units allow telecommunications equipment fitted with standard BT telephone plugs to be connected to RJ45 based structured cabling systems. The PBX Mastered Line Adapter Unit contains a capacitor across 4 & 5 of the BT telephone socket. Simple to install, the PBX Mastered Line Adapter Unit (LAU) is used for telephone extensions routed through the PABX system.

Features:

  • OFTEL GA5 approved
  • Used for telephone extensions on PABX
  • Rugged design

Specifications:


RJ45 Plug

  • Operating Life: Minimum 750 insertion cycles
  • Contact Material: Phosphor Bronze
  • Contact Plating: 50 micro-inch gold
  • Material: Polycarbonate UL94 V-2

BT Socket

  • Operating Life: Minimum 1000 insertion cycles
  • Socket type: BT600 series
  • Contact Material: Gold over nickel plated Phosphor Bronze
Request
Callback


Additional Information:

  • Item Code: 42-112-2A
Yes! I am interested

150mm Line Adapter Unit

150mm Line Adapter Unit
  • 150mm Line Adapter Unit
Ask For Price
Product Price :Get Latest Price

Product Details:

Operating LifeMinimum 750 insertion cycles
Contact Plating50 micro-inch gold
ModelRJ45 Plug
MaterialPolycarbonate UL94 V-2
Contact MaterialPhosphor Bronze
BrandBKP4
ColorGrey

Line Adapter Units allow telecommunications equipment fitted with standard BT telephone plugs to be connected to RJ45 based structured cabling systems. The secondary Line Adapter Unit (LAU) is simple to install and is used where a secondary telephone is sharing the same extension number.
Features:

  • OFTEL GA5 approved
  • Used for telephone extensions on PABX
  • Rugged design


BT Socket

  • Operating Life: Minimum 1000 insertion cycles
  • Socket type: BT600 series
  • Contact Material: Gold over nickel plated Phosphor Bronze
Request
Callback


Additional Information:

  • Item Code: 42-114
Yes! I am interested

Pair Jumperable Backmount Frame

Pair Jumperable Backmount Frame
  • Pair Jumperable Backmount Frame
Ask For Price
Product Price :Get Latest Price

Product Details:

HousingPBT Self extinguishing VO grade
ConformityDIN 41611
ContactsPhosphor Bronze, Silver plated
Dimensions22mm x 40mm x 125mm
MaterialStainless Steel
ColorSilver
BrandBKP4

The Molex Voice Cabling system is expressly designed for voice circuits, such as block cabling and PBX inter connections. The Molex voice cabling system provides a complete range of products to facilitate a complete voice cabling system, including; termination modules, mounting frames, distribution boxes, tester interfaces and over-voltage protection.

The Voice Cabling system is compatible with other popular cabling systems enabling integration with legacy systems for expansion or refurbishment projects.

A number of different size back mount frames are available to accommodate the modules to suit a variety of application and environments. The frames accommodate modules, over-voltage protection and labelling equipment for a complete system.

Features:

  • Available in 30, 50, 100, 270, 552/690 Pair Backmount and Clip on Configurations
  • Stainless steel construction
  • Modules mount directly onto frame
  • Label holder available separately
  • Dust covers available separately
  • Suitable for wall or cabinet installations


Request
Callback


Additional Information:

  • Item Code: DCN-0000450
Yes! I am interested

Pair Jumperable Backmount Frame

Pair Jumperable Backmount Frame
  • Pair Jumperable Backmount Frame
Ask For Price
Product Price :Get Latest Price

Product Details:

ConformityDIN 41611
ContactsPhosphor Bronze, Silver plated
Dimensions22mm x 40mm x 125mm
HousingPBT Self extinguishing VO grade
MaterialStainless Steel
ColorSilver
BrandBKP4

The Molex Voice Cabling system is expressly designed for voice circuits, such as block cabling and PBX inter connections. The Molex voice cabling system provides a complete range of products to facilitate a complete voice cabling system, including; termination modules, mounting frames, distribution boxes, tester interfaces and over-voltage protection.

The Voice Cabling system is compatible with other popular cabling systems enabling integration with legacy systems for expansion or refurbishment projects.

A number of different size back mount frames are available to accommodate the modules to suit a variety of application and environments. The frames accommodate modules, over-voltage protection and labelling equipment for a complete system.

Features:

  • Available in 30, 50, 100, 270, 552/690 Pair Backmount and Clip on Configurations
  • Stainless steel construction
  • Modules mount directly onto frame
  • Label holder available separately
  • Dust covers available separately
  • Suitable for wall or cabinet installations

Specifications:

Frame

  • Material: Stainless Steel

Module

  • Housing: PBT Self extinguishing VO grade
  • Contacts: Phosphor Bronze, Silver plated
  • Contact Resistance: < 5megaohms
  • Conformity: DIN 41611
  • Dimensions: 22mm x 40mm x 125mm
Request
Callback


Additional Information:

  • Item Code: DCN-00005100
Yes! I am interested

Data & Voice Cabling Termination Tool

Data & Voice Cabling Termination Tool
  • Data & Voice Cabling Termination Tool
Ask For Price
Product Price :Get Latest Price

Product Details:

ToolHigh durability steel
Packaging1 per box
Package Weight60g
HousingVO grade flame-retardant plastic
Item WeightCustomized
BrandBKP4

The Data and Voice Cabling termination tool is designed to provide a reliable, low-impact force termination, which reduces strain on the installer. The tool is compatible with other industry standard IDC formats including 110 and LSA+.

Features:

  • Low-impact termination force
  • Scissor style cut off
  • Wire cutting immobiliser switch
  • Light-weight impact resistant handle
  • Universal IDC compatibility


Request
Callback


Additional Information:

  • Item Code: DCN-00009
Yes! I am interested

Siemens Tripolar Gas Arrestor Tube (GAT) 230V 3 Pin

Siemens Tripolar Gas Arrestor Tube (GAT) 230V 3 Pin
  • Siemens Tripolar Gas Arrestor Tube (GAT) 230V 3 Pin
Ask For Price
Product Price :Get Latest Price

Product Details:

GAT Type3 pole with pins
ContactsPhosphor Bronze, Silver plated
ColorBlue
BrandBKP4
PhaseSingle Phase
Voltage Rating230V 3 PIN

The Gas Arrestor Tube (GAT) is designed for use with the unloaded Gas Arrestor Magazine.

Features:

  • Designed for use with the unloaded Gas Arrestor Magazine


Request
Callback


Additional Information:

  • Item Code: DCN-00018
Yes! I am interested

Test Cord 4 Wire Version

Test Cord 4 Wire Version
  • Test Cord 4 Wire Version
Ask For Price
Product Price :Get Latest Price

Product Details:

Dielectric Strength1000V DC
Is It ArmouredArmoured
ContactPhosphor Bronze
ColorMulti Color
MaterialABS UL94V-0
BrandBKP4

Required for the testing of Molex Connect and Disconnect Modules the cable is equipped with a 2 Pole or 4 Pole connection option. The plug can be used for testing 1 Pair or 2 pair patching. Molex offers a wide range of accessories for the voice cabling system, including; labels, tools and test cords.

Features:

  • Designed exclusively for use with voice cabling systems

Specifications:

Mechanical Characteristics

  • Material: ABS UL94V-0
  • Contact: Phosphor Bronze

Electrical/Optical Characteristics

  • Insulation resistance: R>1000M Ohm
  • Contact resistance: R
  • Dielectric Strength: 1000V DC
Request
Callback


Additional Information:

  • Item Code: DCN-00011
Yes! I am interested

Gas Arrestor Magazine

Gas Arrestor Magazine
  • Gas Arrestor Magazine
Ask For Price
Product Price :Get Latest Price

Product Details:

Operation Temperature-40degreeC to +100degreeC Electrical/Optical Characteristics
DC Spark over Voltage190-300V
GAT Type3 pole with pins
Nom Alternating Discharge Current10A (50Hz,1s)
Dimensions23mm x 50mm x 112mm
BrandBKP4

Gas Arrestor magazines are expressly designed for voice circuits, such as block cabling and PBX inter connections. Gas Arrestor magazines provide an overvoltage system to protect circuits from voltage surges from lightning strikes or similar events. These modules are industry compliant and compatible with other voice cabling systems.

Features:
• Made from fiber reinforced polycarbonate
• Loaded with gas arrestors
• Siemens tripolar gas arrestor tube 230V
• Arrestor Magazine supplied with transparent cover to prevent accidental contact
• ”Telecommunications Network Voltages” sign supplied Specifications: Mechanical Characteristics
• Housing: PBT Self extinguishing VO grade
• Contacts: Phosphor Bronze, Silver plated
• GAT Type: 3 pole with pins
• Dimensions: 23mm x 50mm x 112mm
• Operation Temperature: -40°C to +100°C Electrical/Optical Characteristics
• DC Spark-over Voltage: 190-300V
• Impulse Spark-over Voltage:
• Nominal Impulse Discharge Current: 10kA (wave 8/20µs)
• Transverse Delay Time:
• Nom. Alternating Discharge Current: 10A (50Hz, 1s)
• Insulation Resistance @ 100V: >109megaohms
• Capacitance @ 1MHz: >1pF
• Arc Voltage @ 1A:
• Glow To Arc Transition Current:
• Glow Voltage:
Request
Callback


Additional Information:

  • Item Code: DCN-00006
Yes! I am interested

Gas Arrestor Magazine

Gas Arrestor Magazine
  • Gas Arrestor Magazine
Ask For Price
Product Price :Get Latest Price

Product Details:

HousingPBT Self extinguishing VO grade
Operation Temperature-40degreeC to +100degreeC
ContactsPhosphor Bronze,Silver plated
GAT Type3 pole with pins
Dimensions23mm x 50mm x 112mm
BrandBKP4

Gas Arrestor magazines are expressly designed for voice circuits, such as block cabling and PBX inter connections. Gas Arrestor magazines provide an overvoltage system to protect circuits from voltage surges from lightning strikes or similar events. These modules are industry compliant and compatible with other voice cabling systems.

Features:
  • Made from fiber reinforced polycarbonate
  • Siemens tripolar gas arrestor tube 230V
  • Arrestor Magazine supplied with transparent cover to prevent accidental contact
  • ”Telecommunications Network Voltages” sign supplied


Electrical/optical Characteristics

  • DC Spark-over Voltage: 190-300V
  • Impulse Spark-over Voltage: <500V
  • Nominal Impulse Discharge Current: 10kA (wave 8/20µs)
  • Transverse Delay Time: <0.2µs
  • Nom. Alternating Discharge Current: 10A (50Hz, 1s)
  • Insulation Resistance @ 100V: >109megaohms
  • Capacitance @ 1MHz: >1pF
  • Arc Voltage @ 1A: <35V
  • Glow To Arc Transition Current: <1A
  • Glow Voltage: <200V
Request
Callback


Additional Information:

  • Item Code: DCN-00007
Yes! I am interested

Port Voice Patch Panel

Port Voice Patch Panel
  • Port Voice Patch Panel
Ask For Price
Product Price :Get Latest Price
The Molex 50 port Voice Patch Panel is dedicated to the termination of vertical cabling, supporting UTP, 4, 25 or 50 pair cables in a voice backbone. The 10 port unshielded harmonicas allow for patching of up to 50 ports in only 1U, using standard UTP RJ45 patch cords. Finished in graphite grey, this rugged panel is easy to terminate and is a space & cost effective solution for voice installations.

Features:

  • 1U standard 19” rack mount
  • Category 3 performance
  • 50 x RJ45 KATT IDC
  • Pairs 1/2, 3/6, 4/5
  • labeling system
  • Technical Information

Specifications:

Panel

  • Material: CRS (cold rolled steel)
  • Thickness: 1.52mm
  • Coating: Graphite Grey Powdercoat

Jack Connector

  • Contact Material: Phosphor Bronze
  • Contact Plating: Sn/Pb
  • Plastic Housing: UL 94 V0 rated thermoplastic

IDC Connector

  • Operating Life: Minimum 200 reterminations
  • Contact Material: Copper based alloy
  • Contact Plating: Sn/Pb over Ni
  • Wire Size: 2x 26-22 AWG solid or stranded

Termination Tools: Molex and other industry standard tools. Suitable for 0.4mm 0.6mm solid or stranded cable, minimum o.d. 1.5mm.

Dimensions: 483 x 44 x 110mm

Shipping Weight: 1.275kgs
Request
Callback


Additional Information:

  • Item Code: PID-0016250
Yes! I am interested

30 Pair Jumperable Back Mount Frame

30 Pair Jumperable Back Mount Frame
  • 30 Pair Jumperable Back Mount Frame
Ask For Price
Product Price :Get Latest Price
The Molex Voice Cabling system is expressly designed for voice circuits, such as block cabling and PBX inter connections. The Molex voice cabling system provides a complete range of products to facilitate a complete voice cabling system, including; termination modules, mounting frames, distribution boxes, tester interfaces and over-voltage protection.

The Voice Cabling system is compatible with other popular cabling systems enabling integration with legacy systems for expansion or refurbishment projects.

A number of different size back mount frames are available to accommodate the modules to suit a variety of application and environments. The frames accommodate modules, over-voltage protection and labelling equipment for a complete system.

Features:

  • Available in 30, 50, 100, 270, 552/690 Pair Backmount and Clip on Configurations
  • Stainless steel construction
  • Modules mount directly onto frame
  • Label holder available separately
  • Dust covers available separately
  • Suitable for wall or cabinet installations

Specifications:


Frame

  • Material: Stainless Steel

Module

  • Housing: PBT Self extinguishing VO grade
  • Contacts: Phosphor Bronze, Silver plated
  • Contact Resistance: < 5megaohms
  • Conformity: DIN 41611
  • Dimensions: 22mm x
40mm x 125mm
Request
Callback


Additional Information:

  • Item Code: DCN-00003
Yes! I am interested
X

Explore more products



Reach Us
Binod Kumar (Consultant Sales IT)
254, 3A, 3rd Floor
Bansdroni, Kolkata- 700070, West Bengal, India



Call Us

Share Us

F GT L


Send E-mailSend SMS