Copper Cable

Product Details:

The Molex Premise Networks PowerCat™ 6 U/UTP Cable is a key component of a PowerCat 6 end to end system. Molex PowerCat 6 U/UTP Cable is specifically designed for 10GBase-T Networks. When used in configuration as a full PowerCat 6 UTP end to end system, Molex provides a 25 year system warranty.

Features:

• Minimizes Alien crosstalk
• Complies to Augmented Category 6 requirements
• Electrical performance characteristics, including balance, guaranteed across entire frequency range
• Packaged in reels for easy installation
• RoHS compliant

Specifications:

Materials
0.58 mm (23 AWG), bare copper wire insulated with halogen free polyethylene.
Two insulated conductors twisted together to form a pair and four such pairs laid up to form the basic unit.

Standards
North American: ANSI/TIA/EIA-568-B.2-10 (draft 7)
International: ISO/IEC 11801 2nd ed.
European: EN 50173-1IEC 61156-5 (46C/783/CDV)

Flame Rating
LS0H: IEC 60332-1, IEC 60754-2, IEC 61034

Applications
PowerCat 6 U/UTP Cable is intended to handle highspeed voice, video and data applications including:
IEEE 802.3 10Base-T; 100Base-T; 1000BASE-T;10GBase-T
IEEE 802.5 16MB; ISDN; FDDI; ATM 1000BASE-TX(ANSI/TIA/EIA-854-2001)
155 Mb/s ATM
ANSI X3.263 100 Mb/s
4/16 Mb/s Token Ring

Temperature Rating
Installation: 0°C to +50°C
Operation: -10°C to +60°C

Electrical Characteristics

Mutual Capacitance: @ 800Hz Nom. 48nF/km
DC resistance max: 1 min/1000V
Skew: < 45 ns/100m
Pair to ground Unbalance: Nominal Velocity of Propagation (NVP): 67%

Input Impedance (Ohms)
100Ω ± 15 1-100 MHz
100Ω ± 22 100-500 MHz
100Ω ± 25 250-500 MHz

Product Details:

utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile.

Features:

• Patented IDC V-shaped contacts that flex not fatigue when terminated
• Features pointed IDC towers to speed termination and enhance cable retention
• Dual color-coding allows for 568 A/B wiring configuration
• Can be terminated using industry standard
• Compatible with the Molex Keystone Patch Panel

Product Details:

utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile.

Features:

• Patented IDC V-shaped contacts that flex not fatigue when terminated
• Features pointed IDC towers to speed termination and enhance cable retention
• Dual color-coding allows for 568 A/B wiring configuration
• Can be terminated using industry standard
• Compatible with the Molex Keystone Patch Panel

IDC Connector :

• Plastic Housing: Thermoplastic UL94V-0 rated or equivalent
• Operating Life: Minimum 200 determinations
• Contact Material: Copper Alloy IDC
• Contact Plating: Tin/Lead Plate
• Contact Force: 100g minimum
• Wire Accommodation: 22-24 AWG solid

Electrical Characteristics :

• Interface Resistance: 20 milliohms
• Initial Contact Resistance: 2.5 milliohms
• Insulation Resistance: >100 Megaohms

Product Details:

utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile.

Features:

• Patented IDC V-shaped contacts that flex not fatigue when terminated
• Features pointed IDC towers to speed termination and enhance cable retention
• Dual color-coding allows for 568 A/B wiring configuration
• Can be terminated using industry standard
• Compatible with the Molex Keystone Patch Panel

Specifications:

IDC Connector :

• Plastic Housing: Thermoplastic UL94V-0
• Operating Life: Minimum 200 reterminations
• Contact Material: Copper Alloy IDC
• Contact Plating: Matte Tin
• Contact Force: 100g minimum
• Wire Accommodation: 22-24 AWG solid

Parts List:

• Keystone Jack with Stuffer Cap

Product Details:

utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile.

Features:

• Patented IDC V-shaped contacts that flex not fatigue when terminated
• Features pointed IDC towers to speed termination and enhance cable retention
• Dual color-coding allows for 568 A/B wiring configuration
• Can be terminated using industry standard
• Compatible with the Molex Keystone Patch Panel

Specifications:

Jack Connector :

• Plastic Housing: Thermoplastic UL94V-0
• Operating Life: Minimum 750 insertion cycles
• Contact Material: Copper Alloy
• Contact Plating: 50µ” Gold/50µ” Nickel
• Contact Force: 100g minimum
• Plug Retention Force: 11 lb minimum

IDC Connector:

• Plastic Housing: Thermoplastic UL94V-0
• Operating Life: Minimum 200 reterminations
• Contact Material: Copper Alloy IDC
• Contact Plating: Matte Tin
• Contact Force: 100g minimum
• Wire Accommodation: 22-24 AWG solid

Electrical Characteristics :

• Interface Resistance: 20 milliohms Initial
• Contact Resistance: 2.5 milliohms Insulation
• Resistance: >100 Megaohms

Parts List:

• Keystone Jack with Stuffer Cap

 

Product Details:

utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile.

Features:

• Patented IDC V-shaped contacts that flex not fatigue when terminated
• Features pointed IDC towers to speed termination and enhance cable retention
• Dual color-coding allows for 568 A/B wiring configuration
• Can be terminated using industry standard
• Compatible with the Molex Keystone Patch Panel

Specifications:

Jack Connector :

• Plastic Housing: Thermoplastic UL94V-0
• Operating Life: Minimum 750 insertion cycles
• Contact Material: Copper Alloy
• Contact Plating: 50µ” Gold/50µ” Nickel
• Contact Force: 100g minimum
• Plug Retention Force: 11 lb minimum

IDC Connector :

• Plastic Housing: Thermoplastic UL94V-0
• Operating Life: Minimum 200 reterminations
• Contact Material: Copper Alloy IDC
• Contact Plating: Matte Tin
• Contact Force: 100g minimum
• Wire Accommodation: 22-24 AWG solid

Electrical Characteristics:

• Interface Resistance: 20 milliohms Initial
• Contact Resistance: 2.5 milliohms Insulation
• Resistance: >100 Megaohms

Parts List:

• Keystone Jack with Stuffer Cap

Product Details:

utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile.

Features:

• Patented IDC V-shaped contacts that flex not fatigue when terminated
• Features pointed IDC towers to speed termination and enhance cable retention
• Dual color-coding allows for 568 A/B wiring configuration
• Can be terminated using industry standard
• Compatible with the Molex Keystone Patch Panel

Specifications:

Jack Connector :

• Plastic Housing: Thermoplastic UL94V-0
• Operating Life: Minimum 750 insertion cycles
• Contact Material: Copper Alloy
• Contact Plating: 50µ” Gold/50µ” Nickel
• Contact Force: 100g minimum
• Plug Retention Force: 11 lb minimum

IDC Connector :

• Plastic Housing: Thermoplastic UL94V-0
• Operating Life: Minimum 200 reterminations
• Contact Material: Copper Alloy IDC
• Contact Plating: Matte Tin
• Contact Force: 100g minimum
• Wire Accommodation: 22-24 AWG solid

Electrical Characteristics :

• Interface Resistance: 20 milliohms Initial
• Contact Resistance: 2.5 milliohms Insulation
• Resistance: >100 Megaohms

Parts List:

• Keystone Jack with Stuffer Cap

 

Product Details:

Molex’s range of MOD-Clip jacks are designed to maintain clean secure connections. The MOD-Clip DataGate jack features a patented ‘spring-loaded shutter’ which protects it from dust and contaminants as well as provides tactile feedback – the spring-loaded shutter pops out an improperly seated patch cord – all with single-handed plug-in and removal.

Features:

• Shuttered and Unshuttered variants available
• The MOD-Clip DataGate jack features a “Spring Loaded” gate that prevents incomplete mating
• The MOD-Clip DataGate jack features pointed IDC towers to speed termination and enhance cable retention
• The MOD-Clip DataGate jack allows rear and side entry cable termination
• IDC contacts that flex not fatigue when terminated
• 568 A/B wiring configuration
• RoHS Compliant
• Designed for use with Molex’s range of MOD-CLIP wallplates
• Designed to fit the Clipsal®, HPM® and PDL® system of wallplates

Product Details:

utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile.

Features:

• Patented IDC V-shaped contacts that flex not fatigue when terminated
• Features pointed IDC towers to speed termination and enhance cable retention
• Dual color-coding allows for 568 A/B wiring configuration
• Can be terminated using industry standard
• Compatible with the Molex Keystone Patch Panel

Jack Connector :

• Plastic Housing: Thermoplastic UL94V-0
• Operating Life: Minimum 750 insertion cycles
• Contact Material: Copper Alloy
• Contact Plating: 50µ” Gold/50µ” Nickel
• Contact Force: 100g minimum
• Plug Retention Force: 11 lb minimum

IDC Connector :

• Plastic Housing: Thermoplastic UL94V-0
• Operating Life: Minimum 200 reterminations
• Contact Material: Copper Alloy IDC
• Contact Plating: Matte Tin
• Contact Force: 100g minimum
• Wire Accommodation: 22-24 AWG solid

Electrical Characteristics :

• Interface Resistance: 20 milliohms Initial
• Contact Resistance: 2.5 milliohms Insulation
• Resistance: >100 Megaohms

Parts List:

• Keystone Jack with Stuffer Cap