BKP4 Technologies
BKP4 Technologies
Bansdroni, Kolkata, West Bengal
SEND SMS
SEND EMAIL

Advanced Physical Layer Management

Prominent & Leading Wholesale Distributor from Kolkata, we offer miim fiber optic patch cord, miim fiber optic patch cord 91-pp-4a2-00500, miim 96 channel software license, miim 576 channel scanner, miim demonstration kit - combination and miim demonstration kit - fiber.

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorYellow
BrandBKP4
Fiber Optic Patchcord TypeSingle Mode
Fibre CoreSimplex
UsageTelecommunication
Storage-50degreeC to 80degreeC
Operation-20degreeC to 50degreeC
Installation-20degreeC to 50degreeC
Cable Weight3m - 49g

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions


Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color:
9/125μ OS2: Yellow

Electrical/optical Characteristics
Maximum Insertion Loss:
OS1, OS2: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Singlemode Fiber Specification
OS2
Maximum Attenuation (dB/km) (1300nm / 1500 nm): 0.4 / 0.4
Request
Callback


Additional Information:

  • Item Code: 91-PP-2A2-00300
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

Connector TypeDuplex LC
Durability500 insertions
Cable Weight83g
Cable Length5m
Installation Temperature Range-20C to 50C
Installation Operation Range-20C to 50 C
Sheath ColorYellow
Maximum Long Term Tensile300 Nm

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM System.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions
Request
Callback


Additional Information:

  • Item Code: 91-PP-2A2-00500
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

Durability500 insertions
BrandBKP4
Cable Weight2m - 34g
ColorYellow
Fiber Optic Patchcord TypeSingle Mode
UsageTelecommunication

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions
Model Overview:

Connector Type: Duplex LC

Durability: 500 insertions

Cable Weight:
2m - 34g

Temperature range:
Installation: -20°C to 50°C
Operation: -20°C to 50°C
Storage: -50°C to 80°C

Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color:
50/125μ OM3: Aqua

Maximum Insertion Loss:
OM1, OM2, OM3, OM4: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Multimode Fiber Specification
OM3
Bandwidth (OFL): 1500 / 500
Maximum Attenuation (dB/km) (850nm / 1300 nm): 3.5 / 1.5



Request
Callback


Additional Information:

  • Item Code: 91-PP-3A2-00200
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorYellow
BrandBKP4
Connector TypeDuplex LC
Durability500 insertions
Cable Weight5m - 83g
Installation-20degreeC to 50degreeC
UsageTelecommunication

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions

Speciifcations:

Mechanical Characteristics

Connector Type: Duplex LC

Durability: 500 insertions

Cable Weight:
5m - 83g

Temperature range:
Installation: -20°C to 50°C
Operation: -20°C to 50°C
Storage: -50°C to 80°C

Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color: 50/125μ OM3: Aqua

Electrical/Optical Characteristics

Maximum Insertion Loss:
OM1, OM2, OM3, OM4: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Multimode Fiber Specification
OM3
Bandwidth (OFL): 1500 / 500
Maximum Attenuation (dB/km) (850nm / 1300 nm): 3.5 / 1.5

Request
Callback


Additional Information:

  • Item Code: 91-PP-3A2-00500
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorYellow
ConditionNew
BrandBKP4
Connector TypeDuplex LC
Durability500 insertions
Cable Weight10m - 157g

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H
  • )Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions


Temperature range:
Installation: -20°C to 50°C
Operation: -20°C to 50°C
Storage: -50°C to 80°C

Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color:
50/125μ OM3: Aqua

Maximum Insertion Loss:
OM1, OM2, OM3, OM4: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Multimode Fiber Specification
OM3
Bandwidth (OFL): 1500 / 500
Maximum Attenuation (dB/km) (850nm / 1300 nm): 3.5 / 1.5

Request
Callback


Additional Information:

  • Item Code: 91-PP-3A2-01000
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandBKP4
ConditionNew
Fiber Optic Patchcord TypeSingle Mode
Connector TypeDuplex LC
Durability500 insertions
Cable Weight2m - 34g
Installation-20degreeC to 50degreeC
UsageTelecommunication, Computer Network, CATV Network, Fiber optic data transmission, Test Equipment

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in single mode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions


Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color:
50/125μ OM4: Aqua

Maximum Insertion Loss:
OM1, OM2, OM3, OM4: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Multimode Fiber Specification
OM4
Bandwidth (OFL): 3500 / 500
Maximum Attenuation (dB/km) (850nm / 1300 nm): 3.5 / 1.5

Request
Callback


Additional Information:

  • Item Code: 91-PP-4A2-00200
Yes! I am interested

MIIM Fiber Optic Patch Cord 91-PP-4A2-00500

MIIM Fiber Optic Patch Cord 91-PP-4A2-00500
  • MIIM Fiber Optic Patch Cord 91-PP-4A2-00500
Ask For Price
Product Price :Get Latest Price

Product Details:

Connector TypeDuplex LC
Durability500 insertions
Cable Weight83 Gram
Cable Length5m
Nominal Outside Diameter6 mm x 2.76 mm
Installation Temperature Range-20C to 50C
Storage Temperature Range-50C to 80C
Operation Temperature Range-20C to 50C
Number of Fibers Terminated2
Maximum Long Term Tensile300 Nm

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM System.

Features:
  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions
Request
Callback
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorYellow
BrandBKP4
Fiber Optic Patchcord TypeSingle Mode
Fibre CoreSimplex
UsageTelecommunication
Connector TypeDuplex LC
Durability500 insertions
Cable Weight2m - 34g
Installation-20degreeC to 50degreeC

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:
  • Robust duplex housings protect fibres
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions

Specifcations:

Connector Type: Duplex LC

Durability: 500 insertions

Cable Weight:
2m - 34g

Temperature range:
Installation: -20°C to 50°C
Operation: -20°C to 50°C
Storage: -50°C to 80°C

Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color:
50/125μ OM2: Gray

Maximum Insertion Loss:
OM1, OM2, OM3, OM4: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Multimode Fiber Specification
OM2
Bandwidth (OFL): 500 / 500
Maximum Attenuation (dB/km) (850nm / 1300 nm): 3.5 / 1.5

Request
Callback


Additional Information:

  • Item Code: 91-PP-5A2-00200
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

Fiber Optic Patchcord TypeSingle Mode
Fibre CoreSimplex
ColorYellow
BrandBKP4
UsageTelecommunication, Computer Network, CATV Network, Fiber optic data transmission, Test Equipment
Connector TypeDuplex LC
Durability500 insertions
Cable Weight3m - 49g

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:
  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions


Temperature range:

  • Installation: -20°C to 50°C
  • Operation: -20°C to 50°C
  • Storage: -50°C to 80°C
  • Nominal Outside Diameter: 6 mm x 2.76 mm


Minimum Bend Radius:

  • Installation 4.1 cm
  • Long Term 2.8 cm

 

  • Maximum Long Term Tensile: 300 Nm
  • Number of Fibers Terminated: 2


Cable Assembly Length Tolerance:

  • < 15 m = -0 +/-100 mm
  • >15 m = -0 + 1%


Sheath Color: 50/125μ OM2: Gray

Maximum Insertion Loss: OM1, OM2, OM3, OM4: 0.3 dB Maximum

Return Loss:

  • OS1, OS2
  • UPC: > 50 dB Min

Multimode Fiber Specification
OM2
Bandwidth (OFL): 500 / 500
Maximum Attenuation (dB/km) (850nm / 1300 nm): 3.5 / 1.5

Request
Callback


Additional Information:

  • Item Code: 91-PP-5A2-00300
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

Type3 Pin, 2 Pin
ColorYellow
BrandBKP4
Fibre CoreSimplex
UsageTelecommunication
Connector TypeDuplex LC
Durability500 insertions
Cable Weight5m - 83g

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions


Temperature range:
Installation: -20°C to 50°C
Operation: -20°C to 50°C
Storage: -50°C to 80°C

Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color:
50/125μ OM2: Gray

Maximum Insertion Loss:
OM1, OM2, OM3, OM4: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Multimode Fiber Specification
OM2
Bandwidth (OFL): 500 / 500
Maximum Attenuation (dB/km) (850nm / 1300 nm): 3.5 / 1.5

Request
Callback


Additional Information:

  • Item Code: 91-PP-5A2-00500
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorYellow
BrandBKP4
Fiber Optic Patchcord TypeSingle Mode
Fibre CoreSimplex
UsageTelecommunication
Temperature range Installation-20C to 50C

MIIM Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system. Features Robust duplex housings protect fibers Monitoring contact interfaces with MIIM fiber patch panels MIIM patch cords are constructed from two fibers contained in an outer jacket Standard jacket material is Low Smoke Zero Halogen (LS0H) Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions Specifications Connector Type Duplex LC Durability 500 insertions Cable Weight 1m - 18g Temperature range Installation -20C to 50C Operation -20C to 50C Storage -50C to 80C Nominal Outside Diameter 6 mm x 2.76 mm Minimum Bend Radius Installation 4.1 cm Long Term 2.8 cm Maximum Long Term Tensile 300 Nm Number of Fibers Terminated 2 Cable Assembly Length Tolerance < 15 m = -0 +/-100 mm >15 m = -0 + 1% Sheath Color 62.5/125 OM1 Orange Maximum Insertion Loss OM1, OM2, OM3, OM4 0.3 dB Maximum Return Loss OS1, OS2 UPC > 50 dB Min Multimode Fiber Specification OM1 Bandwidth (OFL) 200 / 500 Maximum Attenuation (dB/km) (850nm / 1300 nm) 3.5 / 1.5
Request
Callback


Additional Information:

  • Item Code: 91-PP-6A2-00100
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorYellow
BrandBKP4
UsageTelecommunication
Connector TypeDuplex LC
Durability500 insertions
Cable Weight2m - 34g
Installation-20degreeC to 50degreeC
Operation-20degreeC to 50degreeC

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions



Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color:
62.5/125μ OM1: Orange

Maximum Insertion Loss:
OM1, OM2, OM3, OM4: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Multimode Fiber Specification
OM1
Bandwidth (OFL): 200 / 500
Maximum Attenuation (dB/km) (850nm / 1300 nm): 3.5 / 1.

Request
Callback


Additional Information:

  • Item Code: 91-PP-6A2-00200
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

Type3 Pin, 2 Pin
ColorYellow
Connector TypeDuplex LC
Durability500 insertions
Cable Weight3m - 49g
Installation-20degreeC to 50degreeC
Operation-20degreeC to 50degreeC
Storage-50degreeC to 80degreeC

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacke
  • tStandard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions

Specifications:

Connector Type: Duplex LC

Durability: 500 insertions

Cable Weight:
3m - 49g

Temperature range:
Installation: -20°C to 50°C
Operation: -20°C to 50°C
Storage: -50°C to 80°C

Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color:
62.5/125μ OM1: Orange

Maximum Insertion Loss:
OM1, OM2, OM3, OM4: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Multimode Fiber Specification
OM1
Bandwidth (OFL): 200 / 500
Maximum Attenuation (dB/km) (850nm / 1300 nm): 3.5 / 1.5

Request
Callback


Additional Information:

  • Item Code: 91-PP-6A2-00300
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorYellow
BrandBKP4
Fiber Optic Patchcord TypeSingle Mode
Connector TypeDuplex LC
Durability500 insertions
Cable Weight5m - 83g
UsageTelecommunication, Computer Network, Fiber optic data transmission

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:
  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions


Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color:
62.5/125μ OM1: Orange

Maximum Insertion Loss:
OM1, OM2, OM3, OM4: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Multimode Fiber Specification
OM1
Bandwidth (OFL): 200 / 500
Maximum Attenuation (dB/km) (850nm / 1300 nm): 3.5 / 1.5

Request
Callback


Additional Information:

  • Item Code: 91-PP-6A2-00500
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorYellow
BrandBKP4
Connector TypeDuplex LC
Durability500 insertions
Cable Weight10m - 157g
Installation-20degreeC to 50degreeC
Operation-20degreeC to 50degreeC
UsageTelecommunication, Computer Network, CATV Network, Fiber optic data transmission, Test Equipment

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:
  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions



Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color:
62.5/125μ OM1: Orange

Maximum Insertion Loss:
OM1, OM2, OM3, OM4: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Multimode Fiber Specification
OM1
Bandwidth (OFL): 200 / 500
Maximum Attenuation (dB/km) (850nm / 1300 nm): 3.5 / 1.5

Request
Callback


Additional Information:

  • Item Code: 91-PP-6A2-01000
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorYellow
BrandBKP4
Fiber Optic Patchcord TypeSingle Mode
Fibre CoreSimplex
UsageComputer Network
Connector TypeDuplex LC
Durability500 insertions
Cable Weight2m - 34g

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions


Temperature range:
Installation: -20°C to 50°C
Operation: -20°C to 50°C
Storage: -50°C to 80°C

Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color: 9/125μ OS1: Yellow

Electrical/Optical Characteristics

Maximum Insertion Loss:
OS1, OS2: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Singlemode Fiber Specification
OS1
Maximum Attenuation (dB/km) (1300nm / 1500 nm): 1.0 / 1.0

Request
Callback


Additional Information:

  • Item Code: 91-PP-8A2-00200
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorYellow
BrandBKP4
Fibre CoreSimplex
UsageTelecommunication
Connector TypeDuplex LC
Durability500 insertions
Cable Weight5m - 83g
Installation-20degreeC to 50degreeC
Operation-20degreeC to 50degreeC
Storage-50degreeC to 80degreeC

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:
  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions



Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color: 9/125μ OS1: Yellow

Electrical/Optical Characteristics

Maximum Insertion Loss:
OS1, OS2: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Singlemode Fiber Specification
OS1
Maximum Attenuation (dB/km) (1300nm / 1500 nm): 1.0 / 1.0

Request
Callback


Additional Information:

  • Item Code: 91-PP-8A2-00500
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorYellow
Fiber Optic Patchcord TypeSingle Mode
Fibre CoreSimplex
Connector TypeDuplex LC
Durability500 insertions
Cable Weight10m - 157g
Nominal Outside Diamete6 mm x 2.76 mm
BrandBKP4

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions



Temperature range:
Installation: -20°C to 50°C
Operation: -20°C to 50°C
Storage: -50°C to 80°C

Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color: 9/125μ OS1: Yellow

Electrical/Optical Characteristics

Maximum Insertion Loss:
OS1, OS2: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Singlemode Fiber Specification
OS1
Maximum Attenuation (dB/km) (1300nm / 1500 nm): 1.0 / 1.0

Request
Callback


Additional Information:

  • Item Code: 91-PP-8A2-01000
Yes! I am interested

MIIM 96 Channel Software License

MIIM 96 Channel Software License
  • MIIM 96 Channel Software License
Ask For Price
Product Price :Get Latest Price

Product Details:

No of channel96 Channel
BrandBKP4
TypeNetworking Solutions
Network TypeBoth Wired & Wireless
Application TypeCommercial
Required TurnaroundProject Based

MIIM 96 Channel Software Licenses are used to enable activation of MIIM panels on MIIM scanners. Channel Licenses are installed on the MIIM server. Each 96 Channel License activates four scanner ports which is ideal for low density environments where the entire channel capacity of a scanner is not required. Multiple 96 Channel Licenses may be installed on a scanner to provide a solution matching the number of channels served by a scanner. 96 channel licenses can be added incrementally as additional channels are connected to the scanner.

Features:

  • Enables scanner – application server communication 
  • Scanners may contain multiple 96 Channel Licenses to match channel density on each scanner 
  • 96 Channel Licenses may be added to a scanner at any time
Request
Callback


Additional Information:

  • Item Code: IMA-00101
Yes! I am interested

MIIM 576 Channel Scanner

MIIM 576 Channel Scanner
  • MIIM 576 Channel Scanner
Ask For Price
Product Price :Get Latest Price

Product Details:

MaterialCRS (cold rolled steel)
BrandBKP4
Size44mm x 483mm x 216mm
Universal AC input110 Vac - 240 Vac, 50-60Hz
SafetyUL/CSA 60950-1, IEC 60950-1, EN 60950-1
Thickness.060inch (1.52mm)
CoatingBlack powder coated finish

MIIM™ scanners work with the MIIM server application software and MIIM patch panels to co-ordinate work order management, provide LED patch guidance, and to sense and convey the status of connectivity at work area outlets to the MIIM server. Each 1U scanner can be connected to up to 48 patch panels providing monitoring of up to 576 separate physical channels in a single cross-connect zone or 1152 channels in an interconnect zone. An unlimited number of scanners can be administered by the MIIM server in a single site. Standard RJ45 patch cords are used as the communication bus connection between scanners and patch cords.

In the event that the MIIM application cannot communicate with a scanner, the scanner records transactions in a queue for later delivery to the MIIM software. Scanners recover from power outages without requiring reconfiguration. MIIM scanners consume little power, which can be critical in power-hungry environments such as Data Centers.

Features:

  • Simple configuration
  • High port density: 1U scanner supports up to 576 cross connect channels or 1152 interconnect channels.
  • Low power consumption minimizes heat generation
  • Web interface for administration.
  • Automatic synchronization with MIIM Server after outage or system failure
  • Transaction queues record events for later delivery in the event communication with the MIIM Server is disrupted.
  • Scanner can be connected to MIIM panels and tested for proper operation without requiring connection to MIIM Server.
  • Communication bus connection between the scanner and patch panel is via an industry standard RJ45 patch cord

MIIM Scanner

  • Capacity: 576 cross connect channels or 1152 interconnect per scanner, one scanner per zone
  • Max power consumption: 15 Watts
  • Heat Generation: 51 BTU / Hour
  • Universal AC input: 110 Vac - 240 Vac, 50-60Hz
  • Operating Conditions: 0 to 50ºC (32 to 122ºF), 15-90% Relative Humidity non-condensing
  • Storage Conditions: -10 to 60ºC (14 to 140ºF), 10 to 95% Relative Humidity non-condensing
  • Emissions: FCC Part 15 Class B, EN55022 Class B
  • Safety: UL/CSA 60950-1, IEC 60950-1, EN 60950-1
  • Ethernet Interface: Two RJ45 Network Interface Controller (NIC) ports - dual speed 10/100 Base-T Ethernet
  • Communication Bus Ports: 48 RJ45 ports on the rear for data communication and power connection to MIIM patch panels.

Mechanicals :

  • Material: CRS (cold rolled steel)
  • Thickness: .060” (1.52mm)
  • Coating: Black powder coated finish


Dimensions:

  • 44mm x 483mm x 216mm
  • (1.75”H x 19.0”W x 8.5”D)


Shipping Weight :

  • 4kg (8.8lbs.)
  • Scanner is supplied with one wire manager and one International 19-inch mounting kit.


Note:

  • Power Cord not included
  • A standard IEC 60320 power cord - (Comprising a power plug and C13 Plug/outlet) is required
Request
Callback


Additional Information:

  • Item Code: IMS-00100
Yes! I am interested

MIIM Demonstration Kit - Combination

MIIM Demonstration Kit - Combination
  • MIIM Demonstration Kit - Combination
Ask For Price
Product Price :Get Latest Price

Product Details:

Automation GradeSemi-Automatic
Tem Installation0 - 50 C
Operation0 - 50 C
Storage10 - 60 C
Display TypeLcd
ApplicationNetworking
Finishing TypePowder Coated
BrandBKP4

Kits demonstrate the features and benefits of the MIIM solution across the end-to-end channel on a fully-functional network. Users may change patching or connected end devices to demonstrate MIIM's physical layer monitoring and management capability.

Kits are also excellent troubleshooting systems to replicate any site issues in a controllable network environment.

Features

  • Available in Category 6 copper, LC fiber, or combination copper and fiber
  • Copper panels are pre-terminated
  • Customer supplies server, router, and switch
  • Cable in kit are PVC and may not meet local building codes
  • Channels constructed in class will not comply with TIA standard

Specifications

Temperature rating
  • Installation 0 - 50 C
  • Operation 0 - 50 C
  • Storage -10 - 60 C

NB
MPN part numbers may vary by region

Parts List

MIIM 576 Channel Scanner    IMS-00100 x 1
MIIM Server Software        IMA-00101 x 1
MIIM 96 Channel PP License    IMA-00102 x 1
MIIM Category 6 24-Port Patch Panel    PID-00221 x 2
MIIM Outlet Terminators (bag of 24)    IMT-00100 x 1
MIIM MM 24-Port Fiber LC Patch Panel    RFR-00301 x 2
24-port C6 Patch Panel    PID-00141 x 1
MIIM Fiber Patch Cords 1m    91.PP.3A2.00100 x 6
C6 U/UTP Solid Cable Patch Cord ASSY. PVC Grey 2M    PCD-00455-0E x 6
C6 U/UTP Solid Cable PVC Grey - 4 pairs (12 Metres)    CAA-00286/00326 x 12
Slim Boot Patch Cord 568A/B UTP C6 0.5m - Grey    PCD-00347-0E x 10
Slim Boot Patch Cord 568A/B UTP C6 1.5m - Yellow    PCD-00349-0K x 4
Slim Boot Patch Cord 568A/B UTP C6 1m - Green    PCD-00348-0J x 2
Slim Boot Patch Cord 568A/B UTP C6 1.5m - Green    PCD-00349-0J x 1
Slim Boot Patch Cord 568A/B UTP C6 5m - Green    PCD-00355-0J x 1
1 U Ring Run Panel    25.B016G x 3
1 U Tidy Brush Panel    25.A029G x 1
Blank Connector Icon Labels (1 pack ea. White, Red, Yellow, Blue)    CSP-00021 x 4
12U Rack    25-x841 x 1

Request
Callback


Additional Information:

  • Item Code: SP-MIR-CF-01
Yes! I am interested

MIIM Demonstration Kit - Fiber

MIIM Demonstration Kit - Fiber
  • MIIM Demonstration Kit - Fiber
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandBKP4
ColorBlack
Compound GaugeCustomized
PhaseSingle
Automation GradeManual
Display TypeDigital

Kits demonstrate the features and benefits of the MIIM solution across the end-to-end channel on a fully-functional network. Users may change patching or connected end devices to demonstrate MIIM's physical layer monitoring and management capability.

Kits are also excellent troubleshooting systems to replicate any site issues in a controllable network environment.

Features

  • Available in Category 6 copper, LC fiber, or combination copper and fiber
  • Copper panels are pre-terminated
  • Customer supplies server, router, and switch
  • Cable in kit are PVC and may not meet local building codes
  • Channels constructed in class will not comply with TIA standard

Model Overview:

Temperature rating
Installation 0 - 50 C
Operation 0 - 50 C
Storage -10 - 60 C

NB
MPN part numbers may vary by region

Parts List

MIIM 576 Channel Scanner    IMS-00100 x 1
MIIM Server Software        IMA-00101 x 1
MIIM 96 Channel PP License    IMA-00102 x 1
MIIM Category 6 24-Port Patch Panel    PID-00221 x 0
MIIM Outlet Terminators (bag of 24)    IMT-00100 x 0
MIIM MM 24-Port Fiber LC Patch Panel    RFR-00301 x 2
24-port C6 Patch Panel    PID-00141 x 0
MIIM Fiber Patch Cords 1m    91.PP.3A2.00100 x 6
C6 U/UTP Solid Cable Patch Cord ASSY. PVC Grey 2M    PCD-00455-0E x 0
C6 U/UTP Solid Cable PVC Grey - 4 pairs (12 Metres)    CAA-00286/00326 x 0
Slim Boot Patch Cord 568A/B UTP C6 0.5m - Grey    PCD-00347-0E x 0
Slim Boot Patch Cord 568A/B UTP C6 1.5m - Yellow    PCD-00349-0K x 2
Slim Boot Patch Cord 568A/B UTP C6 1m - Green    PCD-00348-0J x 1
Slim Boot Patch Cord 568A/B UTP C6 1.5m - Green    PCD-00349-0J x 1
Slim Boot Patch Cord 568A/B UTP C6 5m - Green    PCD-00355-0J x 1
1 U Ring Run Panel    25.B016G x 2
1 U Tidy Brush Panel    25.A029G x 1
Blank Connector Icon Labels (1 pack ea. White, Red, Yellow, Blue)    CSP-00021 x 0
12U Rack    25-x841 x 1

Request
Callback


Additional Information:

  • Item Code: SP-MIR-FO-01
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

Type3 Pin
ColorYellow
BrandBKP4
Connector TypeLC, FC, ST, SC
Fiber Optic Patchcord TypeSingle Mode
Fibre CoreSimplex
UsageTelecommunication, Computer Network, CATV Network, Fiber optic data transmission, Test Equipment

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions

Specifications:


Mechanical Characteristics

Connector Type: Duplex LC

Durability: 500 insertions

Cable Weight:
10m - 157g

Temperature range:
Installation: -20°C to 50°C
Operation: -20°C to 50°C
Storage: -50°C to 80°C

Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color:
9/125μ OS2: Yellow

Electrical/Optical Characteristics

Maximum Insertion Loss:
OS1, OS2: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Singlemode Fiber Specification
OS2
Maximum Attenuation (dB/km) (1300nm / 1500 nm): 0.4 / 0.4

Request
Callback


Additional Information:

  • Item Code: 91PP2A201000
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

Type3 Pin
ColorYellow
Connector TypeLC, FC, ST, SC
Fiber Optic Patchcord TypeDouble Mode
Fibre CoreDuplex
UsageTelecommunication, Computer Network, CATV Network, Fiber optic data transmission, Test Equipment

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions

Model Overview:

Mechanical Characteristics

Connector Type: Duplex LC

Durability: 500 insertions

Cable Weight:
10m - 157g

Temperature range:
Installation: -20°C to 50°C
Operation: -20°C to 50°C
Storage: -50°C to 80°C

Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color:
50/125μ OM4: Aqua

Electrical/Optical Characteristics

Maximum Insertion Loss:
OM1, OM2, OM3, OM4: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Multimode Fiber Specification
OM4
Bandwidth (OFL): 3500 / 500
Maximum Attenuation (dB/km) (850nm / 1300 nm): 3.5 / 1.5

Request
Callback


Additional Information:

  • Item Code: 91-PP-4A2-01000
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorYellow
BrandBKP4
Installation-20degreeC to 50degreeC
Cable Weight1m - 18g
Durability500 insertions
Connector TypeDuplex LC
UsageTelecommunication, Computer Network, CATV Network, Fiber optic data transmission, Test Equipment

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions

Model Overview:
  • Operation: -20°C to 50°C
  • Storage: -50°C to 80°C
  • Nominal Outside Diameter: 6 mm x 2.76 mm
  • Minimum Bend Radius:
  • Installation 4.1 cm
  • Long Term 2.8 cm
  • Maximum Long Term Tensile: 300 Nm
  • Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:

  • < 15 m = -0 +/-100 mm
  • >15 m = -0 + 1%

Sheath Color:

  • 9/125μ OS2: Yellow

Electrical/Optical Characteristics

Maximum Insertion Loss:

  • OS1, OS2: 0.3 dB Maximum

Return Loss:

  • OS1, OS2
  • UPC: > 50 dB Min

Singlemode Fiber Specification:

  • OS2
  • Maximum Attenuation (dB/km) (1300nm / 1500 nm): 0.4 / 0.4
Request
Callback


Additional Information:

  • Item Code: 91-PP-2A2-00100
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price
MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions

Speciifcations:

Connector Type: Duplex LC

Durability: 500 insertions

Cable Weight:
3m - 49g

Temperature range:
Installation: -20°C to 50°C
Operation: -20°C to 50°C
Storage: -50°C to 80°C

Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color:
50/125μ OM3: Aqua

Maximum Insertion Loss:
OM1, OM2, OM3, OM4: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Multimode Fiber Specification
OM3
Bandwidth (OFL): 1500 / 500
Maximum Attenuation (dB/km) (850nm / 1300 nm): 3.5 / 1.5

Request
Callback


Additional Information:

  • Item Code: 91-PP-3A2-00300
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorYellow
BrandBKP4
Fiber Optic Patchcord TypeSingle Mode
Fibre CoreSimplex
UsageComputer Network
Connector TypeDuplex LC
Durability500 insertions
Cable Weight1m - 18g

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions



Temperature range:
Installation: -20°C to 50°C
Operation: -20°C to 50°C
Storage: -50°C to 80°C

Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color:
50/125μ OM4: Aqua

Maximum Insertion Loss:
OM1, OM2, OM3, OM4: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Multimode Fiber Specification
OM4
Bandwidth (OFL): 3500 / 500
Maximum Attenuation (dB/km) (850nm / 1300 nm): 3.5 / 1.5

Request
Callback


Additional Information:

  • Item Code: 91-PP-4A2-00100
Yes! I am interested

MIIM Fiber Optic Patch Cord

MIIM Fiber Optic Patch Cord
  • MIIM Fiber Optic Patch Cord
Ask For Price
Product Price :Get Latest Price

Product Details:

Type3 Pin
ColorYellow
BrandBKP4
MaterialPVC
Fiber Optic Patchcord TypeSingle Mode
UsageTelecommunication
Connector TypeDuplex LC
Durability500 insertions
Cable Weight1m - 18g

MIIM™ Fiber Optic patch cords are used to connect MIIM fiber panels within the MIIM System. MIIM patch cords incorporate a monitoring cable along with contact points on the patch cord connectors that activate the detection mechanism in the MIIM patch panel. When used with the rest of the MIIM system, the patch cords will provide connectivity information to the MIIM system.

Features:

  • Robust duplex housings protect fibers
  • Monitoring contact interfaces with MIIM fiber patch panels
  • MIIM patch cords are constructed from two fibers contained in an outer jacket
  • Standard jacket material is Low Smoke Zero Halogen (LS0H)
  • Available in singlemode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) constructions


Temperature range:
Installation: -20°C to 50°C
Operation: -20°C to 50°C
Storage: -50°C to 80°C

Nominal Outside Diameter: 6 mm x 2.76 mm

Minimum Bend Radius:
Installation 4.1 cm
Long Term 2.8 cm

Maximum Long Term Tensile: 300 Nm

Number of Fibers Terminated: 2

Cable Assembly Length Tolerance:
< 15 m = -0 +/-100 mm
>15 m = -0 + 1%

Sheath Color: 9/125μ OS1: Yellow

Electrical/Optical Characteristics
Maximum Insertion Loss:
OS1, OS2: 0.3 dB Maximum

Return Loss:
OS1, OS2
UPC: > 50 dB Min

Singlemode Fiber Specification
OS1
Maximum Attenuation (dB/km) (1300nm / 1500 nm): 1.0 / 1.0

Request
Callback


Additional Information:

  • Item Code: 91-PP-8A2-00100
Yes! I am interested

MIIM Server Application Software

MIIM Server Application Software
  • MIIM Server Application Software
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandBKP4
Recommended screen resolution1200 x 800 or better.
Windows Server2008 R2
Microsoft Internet Explorer Version7.0 or higher
ApplicationNetworking
LocationPan India

MIIM Software is the central data manager for the MIIM system managing OSI Layer 1 infrastructure elements and providing instantaneous information to the IT Manager about connectivity on MIIM enabled channels. MIIM software is a web based application that enables global network access by an unlimited number of users and provides cost effective and accurate network management.

Modules included:
Discovery: on demand discovery on MIIM enabled channels
SNMP: Delivery of messages and alerts to any SNMP receiver

MIIM Reports allow the IT team to extract information contained in the MIIM system about the Layer 1 infrastructure and the assets connected to the infrastructure. Reports include information about assets, work orders, logs, MACs, and connectivity status of MIIM enabled channels.

Features:

  • Hierarchal view of entire enterprise layer 1 infrastructure
  • Drag and drop work orders
  • Work orders for end devices and wire closet patches
  • Guided patching
  • Search feature to easily locate assets and information
  • Assets linkage to building maps
  • Unrestricted number of users per license
  • Event-Driven Discovery
  • SNMP messaging

Model Overview:

MIIM Software is designed for Windows 32 bit and 64-bit environments and requires a TCP/IP network. The following system requirements are recommended:

Server:

  • Supported Operating Systems: Windows
  • Server 2008 (US English version)
  • Windows Server 2008 R2 (US English version).
  • Server should meet Microsoft’s recommended requirements Database
  • Microsoft SQL Server Express 2008
  • Microsoft SQL Server Express 2008 R2


Browser Support:

  • Microsoft Internet Explorer Version 7.0 or higher
  • Firefox Version 3.2 or higher
  • Chrome Version 5.0 or higher
  • Recommended screen resolution of 1200 x 800 or better.
  • Microsoft Silverlight is required on the web browsing device
  • One year technical support provided with initial software purchase (can be renewed on an annual basis)
  • Software Maintenance and Upgrade program available separately
  • Molex recommends Windows Server 2008 R2 and SQL Server Express 2008 R2.
Request
Callback


Additional Information:

  • Item Code: IMA-00102
Yes! I am interested

Power Cat 6 MIIM Outlet Terminator

Power Cat 6 MIIM Outlet Terminator
  • Power Cat 6 MIIM Outlet Terminator
Ask For Price
Product Price :Get Latest Price

Product Details:

Socket TypeModular
Pin Type3 Pin Socket
Socket With ShutterYes
BrandBKP4
Surface TreatmentColor Coated
Mounting TypeWall Mounted

MIIM is part of the Advanced Physical Layer Lifecycle Management (APLLM) solutions- a revolutionary new suite of solutions providing enterprizes with the ability to manage their Physical Layer infrastructure with a level of visibility & integration unique in the structured cabling industry. Using a combination of software, electronics and structured cabling products, APLLM enables users to track and manage their investment from planning through to design, procurement, installation, moves adds and changes (MACs) and the eventual upgrade of the infrastructure, thereby spanning its entire lifecycle. The MIIM Outlet Terminator is used at the work area outlet to allow the MIIM system to monitor the connection of the horizontal cable to the work area outlet. The MIIM Outlet Terminator is effectively a stuffer cap with in-built components that work exclusively in the Molex MIIM solution. It enables the MIIM system to determine circuit integrity to the work area outlet. Communications between the MIIM Outlet Terminator and the MIIM Scanner are transparent to the data channel and operate outside the Ethernet bandwidth. The MIIM system can function independently of the MIIM outlet terminator. However, the terminator provides enhanced functionality in terms of monitoring spare or unused channels. Features Confirms circuit integrity between the MIIM patch panel and the work area outlet Enables monitoring of changes and detects the presence of devices at the outlet Transparent to the Data Channel Specifications Mechanical Characteristics Outlet Terminator Plastic Housing Thermoplastic UL94V-0 rated or equivalent Operating Life Minimum 20 reterminations Contact Material Phosphor Bronze Contact Plating Tin matte with Nickel Contact Force 60g minimum Electrical/optical Characteristics Interface Resistance 20 milliohms Initial Contact Resistance 2.5 milliohms Insulation Insulation Resistance >100 Megohms
Request
Callback


Additional Information:

  • Item Code: IMT-00100
Yes! I am interested

MIIM Category 6, 1U Patch Panels

MIIM Category 6, 1U Patch Panels
  • MIIM Category 6, 1U Patch Panels
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandBKP4
MaterialCRS (cold rolled steel)
ColorBlack
DimensionsCustomized
Thickness1.52 mm (.060 in)
CoatingBlack Zinc

MIIM™ Category 6 UTP Patch Panels are used within the MIIM System. Each 1U 24 Port Patch Panel has one data bus connection port located on the rear of the panel. The data bus connection port connects the panel to the MIIM scanner via a standard RJ45 patch cord. The patch panel is used by the MIIM system to track connectivity in the patch zone and work area. LED status indicators on the panel show status of connectivity between the panel and the scanner and also provide panel guidance for work orders.

The IDC section of the MIIM Patch Panels consist of V-shaped contacts that flex not fatigue when terminated. Each port features a patented spring-loaded shutter. The patch panel works as a conventional patch panel when not connected to the MIIM system. The MIIM patch panel is Category 6 compliant and meets the relevant cabling standards for category 6 performance.

Features:

  • Two power status indicators to ensure proper connection of power supply from the scanner
  • Data bus connection to the MIIM Scanner is via an industry standard RJ45 patch cord
  • Category 6 field configurable for 568 A/B
  • Integral cable management shelf ensures bend radius compliance
  • International hardware kit contains both ANSI and metric hardware
  • Can be terminated using industry standard punch-down tools

Temperature Rating :

  • Installation: 0º C - 50º C
  • Operation: 0º C - 50º C
  • Storage: -20º C - 60º C

Jack Connector :

  • Housing: Zinc Alloy plated bright Ni/Cu
  • Operating Life: Minimum 750 insertions
  • Contact Material: Copper Alloy
  • Contact Plating: 1.25μm Gold over Nickel
  • Contact Force: 100 g minimum
  • Plug Retention Force: 6.8 kg minimum

IDC Connector :

  • Plastic Housing: Polycarbonate UL94V-0 rated
  • Operating Life: Minimum 20 terminations of same gauge wire
  • Contact Material: Copper Alloy
  • IDC Contact Plating: Tin Matte
  • Wire Accommodation: 22-24 AWG solid wire

Shipping Weight:

  • 560g (1 lb. 4 oz.)

Dimensions:

  • 483mm W X 44mm H X 92mm D (19.0" W x 1.75" H x 4.25 D ")

Parts List :

  • MIIM Category 6 Patch Panel with integral cable management shelf
  • Front labeling card index strip
  • International Hardware kit

Electrical/Optical Characteristics

  • Interface Resistance: 20mΩ
  • Initial Contact Resistance: 2.5mΩ
  • Insulation Resistance: > 100MΩ
Request
Callback


Additional Information:

  • Item Code: PID-00221
Yes! I am interested

MIIM Single Mode 24P Duplex LC Fiber Patch Panel

MIIM Single Mode 24P Duplex LC Fiber Patch Panel
  • MIIM Single Mode 24P Duplex LC Fiber Patch Panel
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorBlack
BrandBKP4
Plate Material16 Gauge Cold Rolled Steel
Plate FinishPowder Coating Black
Adaptor Shell materialCrastin SK602 NC010 (PBT 15% G.F.)
Adaptor Shell colorNatural
Alignment SleeveZirconia (SM); Phosphor-Bronze (MM)
Installation Temperature-40 C to +75degreeC

MIIM™ Fiber Optic enclosures are used within the MIIM System. The adapter interface is 24 duplex LC adaptors. Each 1U 24 Port enclosure has one data bus connection port located on the rear of the panel that connects the panel to a MIIM scanner via a standard RJ45 patch cord. Two in-built power status indicators on the panel ensure visibility of power from the scanner. When connected to a MIIM scanner, the panels detect connection activity on each duplex LC port. The patch panel works as a conventional patch panel when not connected to the MIIM system.

Features:

  • Two power status indicators to ensure proper connection of power supply from the scanner
  • Uses RJ45 patch cords for data bus connection to the MIIM scanner
  • Panel options for Single Mode and Multimode (OM1, OM2, OM3)
  • Slide out cable management shelf
  • Recessed mounting provides adequate space for routing patch cords, even in free standing enclosures with the front door closed
  • ANSI and international metric hardware kit provided


Request
Callback


Additional Information:

  • Item Code: RFR-00300
Yes! I am interested

MIIM MultiMode 24P Duplex LC Fiber Patch Panel

MIIM MultiMode 24P Duplex LC Fiber Patch Panel
  • MIIM MultiMode 24P Duplex LC Fiber Patch Panel
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandBKP4
ColorBlack
Material16 Gauge Cold Rolled Steel
Plate FinishPowder Coating Black (as applicable)
Adaptor Shell materialCrastin SK602 NC010 (PBT 15% G.F.)
Adaptor Shell colorNatural
Alignment SleeveZirconia (SM); Phosphor-Bronze (MM)
ZirconiaPhosphor-Bronze (MM)

MIIM™ Fiber Optic enclosures are used within the MIIM System. The adapter interface is 24 duplex LC adaptors. Each 1U 24 Port enclosure has one data bus connection port located on the rear of the panel that connects the panel to a MIIM scanner via a standard RJ45 patch cord. Two in-built power status indicators on the panel ensure visibility of power from the scanner. When connected to a MIIM scanner, the panels detect connection activity on each duplex LC port. The patch panel works as a conventional patch panel when not connected to the MIIM system.

Features:

  • Two power status indicators to ensure proper connection of power supply from the scanner
  • Uses RJ45 patch cords for data bus connection to the MIIM scanner
  • Panel options for Multimode (OM1, OM2, OM3)
  • Slide out cable management shelf
  • Recessed mounting provides adequate space for routing patch cords, even in free standing enclosures with the front door closed
  • ANSI and international metric hardware kit provided


Request
Callback


Additional Information:

  • Item Code: RFR-00301
Yes! I am interested
X

Explore more products



Reach Us
Binod Kumar (Consultant Sales IT)
254, 3A, 3rd Floor
Bansdroni, Kolkata- 700070, West Bengal, India



Call Us

Share Us

F GT L


Send E-mailSend SMS